BMW ISTA FAILED TO READ E series

[mondiperformance@hotmail.com]

Hello all i have issue i cannot read BMW E SERIES with ISTA, newer series work ( I use ENET CABLE FOR BOTH )
Thanks in advance

[ek1978]

Enet cable is only for Fxx , for Exx you need either ICOM or D-Can cable

[mondiperformance@hotmail.com]

Hi, thanks , i have d can cable- should any other files be installed to use d can or just change settings to use d can ?

[ek1978]

It's all depending on your ISTA version , if your ISTA has EDIABAS option in the Interface configuration , then you can use D-CAN.

google search can answer your question , last time I used D-Can was 10 years ago .

[mondiperformance@hotmail.com]

Icom is for all series then i assume. ?

[ek1978]

yes ICOM is a BMW official Interface used for all seires.