ISTA+ Standalone 4.55.12 en-GB

[XuLeTZ]

Nice to see you here as well @Orphee.
Thanks for your work

[ek1978]

@Orphee : just for the curiosity , what is the branding on this Patched version of ISTA .

You usually brand it with CT forum , is this one also the same or your left it generic one from the Patcher .

Either ways , thank your for effort and hard work.

[kmi]

Thank you very much @Orphee for this excellent work.

I tested it on my motorbike and, by modifying RheingoldDiagnostics.dll as you explained on GitHub, I was able to clear the error memory using the ENET cable.

I tested it on the motorbike and some things don't work, but they do work on cars. I was wondering if it's possible to add these features to the motorbike as well. All tests were done using the ENET cable.

If I want to run a simple diagnostic, such as checking the headlights, it doesn't detect voltage and doesn't perform it, and the process ends.

ENET programming also doesn't work. It starts by performing a check, but a message appears stating that it doesn't detect the ICOM. Is it possible to program the motorbike with ENET?

I've attached screenshots.

[JSC]

@Orphee : just for the curiosity , what is the branding on this Patched version of ISTA .

You usually brand it with CT forum , is this one also the same or your left it generic one from the Patcher .

Either ways , thank your for effort and hard work.

[elmartin7]

@Orphee Would it be possible to enable testing and programming in ISTA for enet and motorbike?

We are aware of the voltage risk and accept it since we have upgraded many times with a power supply. It just allows us to move forward with this.

[ek1978]

@Orphee : just for the curiosity , what is the branding on this Patched version of ISTA .

You usually brand it with CT forum , is this one also the same or your left it generic one from the Patcher .

Either ways , thank your for effort and hard work.

nice , thank you for the screenshot

[Orphee]

I'm not ISTA-Patcher dev.
for any complain or missing features, ask him on GitHub.

[wirann]

Thank you very much @Orphee for this excellent work.

I tested it on my motorbike and, by modifying RheingoldDiagnostics.dll as you explained on GitHub, I was able to clear the error memory using the ENET cable.

I tested it on the motorbike and some things don't work, but they do work on cars. I was wondering if it's possible to add these features to the motorbike as well. All tests were done using the ENET cable.

If I want to run a simple diagnostic, such as checking the headlights, it doesn't detect voltage and doesn't perform it, and the process ends.

ENET programming also doesn't work. It starts by performing a check, but a message appears stating that it doesn't detect the ICOM. Is it possible to program the motorbike with ENET?

I've attached screenshots.

Bro, Mototorrad always needs icom that is BMW protocal. 
have you find any version can use with ENET??

[Orphee]

The ENET programming is only possible because of Toyota Supra.
Without it there would not be anything in the code to patch for ENET programming.
This is why there is no patch for motorrad.

Patching a simple value to always true is quite easier than patching a code never maint to be available.

[smoke100]

Who has try it does it work good everything service function