ISTA+ Standalone 4.55.40 en-GB *OLD/AGED*

[mick70]

Thanks for uploading!

[AndyC58]

Thanks for providing this

[Sir_Maurice]

Great

[mick70]

@Orphee

"You probably WILL have issues if you have standard tools installed *. So don't whine about ENET/ICOM not working (all modules shown red, etc...) if you have any other Ediabas installed on your computer. Especially if you have a system environment variable like ediabas_config_dir ..."

Is it just about the environment variables? In that case, I could write a batch file that adjusts the relevant variables. I would also need INPA for my old E89.

[Orphee]

You can do whatever you want. no support/help from me.

If you want my releases to work fine, unsinstall/remove any standard tools / ediabas not from ISTA.

Else your on your own.

Edit : for an E89, you don't need ISTA 4.5x. Old 4.39.20 is enough and compatible with BMW standard tools.

[JSC]

@Orphee
"You probably WILL have issues if you have standard tools installed *. So don't whine about ENET/ICOM not working (all modules shown red, etc...) if you have any other Ediabas installed on your computer. Especially if you have a system environment variable like ediabas_config_dir ..."
Is it just about the environment variables? In that case, I could write a batch file that adjusts the relevant variables. I would also need INPA for my old E89.

Is easy and works well with Ista 4.55.xx and standaard tools installed. Just use 2 ediabas ( 7.3 and 7.7 ) and create Mlinks. Thats the way I use and works 100%. Just Use your imagination

[Orphee]

Feel free to create a dedicated topic for it and share your experience.

I'm sure you will make some guys happy.

[iskullbox]

thanks for sharing

[jamiewelch]

amazing thank you

[Gassz16]

Thanks for sharing.