CCC retrofit CIC help

[Kire]

hi , i made retrofit on my bmw e90 from ccc to cic ,, everything its okej but navigacion is still disable , i change ...... wiht tool32  but  i dond have fsc for my new vin number ,, what is the procedure for activation,, tanks to all

[ek1978]

Did you run Etherent wires from quadlock socket to the OBD2 socket ?

IF not , did you install also USB port ?

[Kire]

yes usb port is instaled , i can import musick from usb to hdd , and when i put usb with maps start to make update for maps , but fsc is wrong , ethernet still not but i can do this to

[ek1978]

You need either usb to ethernet adapter specifically D-Link DUB-E100 which is tested by many people, then you can use ethernet cable from this adapter to the computer.

OR you run the ethernet wires to obd then you can use Enet cable . You need one of those 2 methods to be able to inject FSC files to the headunit to enable navigation and update the map.

D-Can can't do FSC work.

[Kire]

bro i connected ethernet cic direck quadlock on bench and whith tool32 direct on pc lan make communication , i read with cicr.prog , what to do next isit better on bench or in the car to read or writhe

[Kire]

Tanks bro , I gona make enet over obd2

[ek1978]

as long as you connect the headunit with pc via Ethernet , then no matter how you do it , it will do the same job.

Give me or PM me your car VIN , I will make a patch for your headunit and upload it here . you need some good software to inject those FSC's , Dr. Gini is very good for this project.

[ek1978]

Here is your patch files for your CIC , I send the password in PM

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

[Kire]

tanks bro

[ek1978]

@Kire : here is the Enet wiring diagram for Exx CIC retrofit . Please make sure your wiring is exactly as the diagram.

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.