03-18-2021, 06:36 AM
Thanks for this!
We have recieved 87% of our goal .. | ||||||
|
||||||
ISTA Standalone / SQLiteDBs / SDP / BLP - latest [TORRENT] with installer EASY
|
03-18-2021, 06:36 AM
Thanks for this!
Hello, i cannot install it automatically,
it shows i dont have Global(...) as shown in screenshots
I even tried to copy that from SQLiteDbs to main folder but didnt help Changed it from openning from WinRAR to 7 Zip it didnt help aswell.. any ideas what to do? I figured it out, need to download Global from drive google once more and it worked!
03-20-2021, 10:32 AM
Hello,
no connection with k-dcan cable, "pad active" error. port number to “COM9” and latency timer to “1” its done. any solution? thanks
03-21-2021, 04:03 PM
Thanks for all of your time to post this.
(03-18-2021, 10:02 AM)Ekowaty Wrote: Hello, i cannot install it automatically, it shows i dont have Global(...) as shown in screenshots File name looks wrong in your screenshot (your file is GLOBAL_4.28.20-004). Correct name is: GLOBAL_4.28.20.7z Also in file "setup.ini" there are md5 hashes. You can use hashmyfiles utility (nirsoft) to check files.
03-23-2021, 02:59 PM
Fantastico!
Grazie mille (03-20-2021, 10:32 AM)nobbynobbs Wrote: Hello,Go to settings > vehicle interface and change to ediabas.ini After, go to C:/Ediabas/bin and edit ediabas.ini for std:obd for Interface and COM9. (03-21-2021, 06:56 PM)Grizold Wrote:Thank you,(03-18-2021, 10:02 AM)Ekowaty Wrote: Hello, i cannot install it automatically, it shows i dont have Global(...) as shown in screenshots Saved me for explaining
03-24-2021, 04:25 PM
(This post was last modified: 03-24-2021, 04:25 PM by mariorossi.)
Hi guys, everything works perfectly, I have a question ... I downloaded FSC-Generator from TOOLS but when I open it it gives me an error "EDIABAS NOT FOUND" how can I solve? I installed them via Mike's le 7.3.0 installer
@XuLeTZ
03-25-2021, 10:37 AM
(03-24-2021, 04:25 PM)mariorossi Wrote: Hi guys, everything works perfectly, I have a question ... I downloaded FSC-Generator from TOOLS but when I open it it gives me an error "EDIABAS NOT FOUND" how can I solve? I installed them via Mike's le 7.3.0 installerI never used Mike's one. You can use the one provided here as well. You have the link in standard tools.txt. At the end it will open a readme file and there you have all the info you need to switch the tools to english.
03-26-2021, 02:26 PM
thanks you so much.
|
« Next Oldest | Next Newest »
|