ISTA+ Standalone 4.61.20 *LATEST* *EASY ONE CLICK INSTALL*

[ls_jay_jay]

HWID: 89122F5-103AB91-F11430A-53B4F4E

Thank you

[vitamink]

Thank you

[Rob]

ls_jay_jay

XtF93J-=hJYqI-NkUeHD-6fkBO1-5M45+b-F+FBMG-=sa4u5-1T2=iV-dRTS4a-zCAjO2-LrFxrB-kaNuYq-CxKFJF-xFmCMX-nOF3K8-saMz+P-N5=Imy-e3=URs-l1Cygz-K3VISU-rKgXRD-ljS+jj-aNuC3K-l9eQl5-SprP=k-tz1sXl

[Shiu]

STOP!!! Read the Forum's Updated Rules now:  CLICK HERE

-------------------------------------------------------

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

Here is ISTA+ Standalone 4.61.20 built with ISTA-Patcher, ready to use for diagnosis.

The installer install all prerequisite when/if needed.

Features enabled are :
- Disable Fake FSC Reject
- ENET Programming Enabled
- Re-activated ICOM A1/A2
- Works with DCAN on port COM3 (Prerequisite : baudrate 115200 / latency 1ms) (shorcut on desktop to switch)
- Fix rescan old DS2 vehicles
- bypass ignition detection with DCAN/Ediabas (click cancel and it continues)
- Motorbike ignition detection disable with ENET (Erase error memory works with ENET)
- Disabled FASTA (Data Not Send)
- Programming works


This release comes as an easy installer all-in-one.
It installs everything like genuine BMW installer does.
No need to manually extract / run reg / create desktop shortcuts...

So it does not install in "C:\EC-APPS" (or anywere you wanted), but in "C:\Program Files\BMW\ISPI\TRIC\ISTA". (and other genuine BMW folders...)
So NO you won't be able to install if if you don't have enough space on your disk C:.

You CAN'T install it if ilean release is installed anymore (in case you usually did).

You probably WILL have issues if you have standard tools installed *. So don't whine about ENET/ICOM not working or very long/slow scan (all modules shown red, etc...) if you have any other Ediabas installed on your computer...Don't ask for help about this.

If you need programming, you will need to download and add SDP/psdzdata FULL

Extract to:

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

You will find attached REG file to enable programming once/if you copied SDP yourself.

The install process can be quite long, especially if you have an antivirus like Windows Defenter anti-malware. I suggest you to disable it to install it faster.

The ISTAGUI.exe has been obfuscated to protect it, it may trigger a false positive on your Antivirus, you will need to whitelist it.

P.S : If you had an earlier release, you have to UNINSTALL it first.

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

[waterman]

Thank You very much!

[equalizer]

Thank you

[cebep]

Thank you

[peterbimmer]

STOP!!! Read the Forum's Updated Rules now:  CLICK HERE

-------------------------------------------------------

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

Here is ISTA+ Standalone 4.61.20 built with ISTA-Patcher, ready to use for diagnosis.

The installer install all prerequisite when/if needed.

Features enabled are :
- Disable Fake FSC Reject
- ENET Programming Enabled
- Re-activated ICOM A1/A2
- Works with DCAN on port COM3 (Prerequisite : baudrate 115200 / latency 1ms) (shorcut on desktop to switch)
- Fix rescan old DS2 vehicles
- bypass ignition detection with DCAN/Ediabas (click cancel and it continues)
- Motorbike ignition detection disable with ENET (Erase error memory works with ENET)
- Disabled FASTA (Data Not Send)
- Programming works


This release comes as an easy installer all-in-one.
It installs everything like genuine BMW installer does.
No need to manually extract / run reg / create desktop shortcuts...

So it does not install in "C:\EC-APPS" (or anywere you wanted), but in "C:\Program Files\BMW\ISPI\TRIC\ISTA". (and other genuine BMW folders...)
So NO you won't be able to install if if you don't have enough space on your disk C:.

You CAN'T install it if ilean release is installed anymore (in case you usually did).

You probably WILL have issues if you have standard tools installed *. So don't whine about ENET/ICOM not working or very long/slow scan (all modules shown red, etc...) if you have any other Ediabas installed on your computer...Don't ask for help about this.

If you need programming, you will need to download and add SDP/psdzdata FULL

Extract to:

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

You will find attached REG file to enable programming once/if you copied SDP yourself.

The install process can be quite long, especially if you have an antivirus like Windows Defenter anti-malware. I suggest you to disable it to install it faster.

The ISTAGUI.exe has been obfuscated to protect it, it may trigger a false positive on your Antivirus, you will need to whitelist it.

P.S : If you had an earlier release, you have to UNINSTALL it first.

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

thanks buddy

[kobos50]

STOP!!! Read the Forum's Updated Rules now:  CLICK HERE

-------------------------------------------------------

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

Here is ISTA+ Standalone 4.61.20 built with ISTA-Patcher, ready to use for diagnosis.

The installer install all prerequisite when/if needed.

Features enabled are :
- Disable Fake FSC Reject
- ENET Programming Enabled
- Re-activated ICOM A1/A2
- Works with DCAN on port COM3 (Prerequisite : baudrate 115200 / latency 1ms) (shorcut on desktop to switch)
- Fix rescan old DS2 vehicles
- bypass ignition detection with DCAN/Ediabas (click cancel and it continues)
- Motorbike ignition detection disable with ENET (Erase error memory works with ENET)
- Disabled FASTA (Data Not Send)
- Programming works


This release comes as an easy installer all-in-one.
It installs everything like genuine BMW installer does.
No need to manually extract / run reg / create desktop shortcuts...

So it does not install in "C:\EC-APPS" (or anywere you wanted), but in "C:\Program Files\BMW\ISPI\TRIC\ISTA". (and other genuine BMW folders...)
So NO you won't be able to install if if you don't have enough space on your disk C:.

You CAN'T install it if ilean release is installed anymore (in case you usually did).

You probably WILL have issues if you have standard tools installed *. So don't whine about ENET/ICOM not working or very long/slow scan (all modules shown red, etc...) if you have any other Ediabas installed on your computer...Don't ask for help about this.

If you need programming, you will need to download and add SDP/psdzdata FULL

Extract to:

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

You will find attached REG file to enable programming once/if you copied SDP yourself.

The install process can be quite long, especially if you have an antivirus like Windows Defenter anti-malware. I suggest you to disable it to install it faster.

The ISTAGUI.exe has been obfuscated to protect it, it may trigger a false positive on your Antivirus, you will need to whitelist it.

P.S : If you had an earlier release, you have to UNINSTALL it first.

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

Thank you

[Basti256]

Thank you!