Easy BMW Tools for E Series (NCS EXPERT,INPA,EDIABAS,WINKFP,TOOL 32,NCS DUMMY)

[nokmaster]

Thanks for the hard work

[mauritius]

What's Installed?

- Inpa 5.0.6 (with English script files & Support for F-series)

- EDIABAS 7.3.0

- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)

- NCS Dummy 4.0.1

- Tool32 4.0.3

- WinKFP 5.3.1

- Integrated SP-DATEN v53.3

- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)

- USB Drivers for cable

Why is this Beneficial?

- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)

- All the latest versions of the programs in one neat install file

- No hunting or searching for SP-DATENs then struggling to import them

- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.

- System Environment PATH variables taken care of by the installer

- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)

The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.

Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

[/font][/size][/color]

Password is bimmerscene.com

thanks

[redbull963]

thank you so much

[toonieee]

helpfull 
thank you so much

[Driftking1453]

thank you in advance

[abi316]

thank you

[dodjob]

pretty cool thanks

[ipolx]

What's Installed?

- Inpa 5.0.6 (with English script files & Support for F-series)

- EDIABAS 7.3.0

- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)

- NCS Dummy 4.0.1

- Tool32 4.0.3

- WinKFP 5.3.1

- Integrated SP-DATEN v53.3

- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)

- USB Drivers for cable

Why is this Beneficial?

- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)

- All the latest versions of the programs in one neat install file

- No hunting or searching for SP-DATENs then struggling to import them

- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.

- System Environment PATH variables taken care of by the installer

- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)

The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.

Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

[/font][/size][/color]

Password is bimmerscene.com

Thanks

[JxB]

Nice one, thanks!

[hiroshi12]

thanks a lot for your effort!