ISTA Standalone / SQLiteDBs / SDP / BLP - latest [TORRENT] with installer EASY

[Proutie87]

Thank for this, will check this one out.

[Broxi55]

Thanks for sharing

[kurumi]

I seem to have issues connecting to my car using ISTA+ 4.32.15 and my J29 (Toyota Supra). Any ideas?

[ir655]

I seem to have issues connecting to my car using ISTA+ 4.32.15 and my J29 (Toyota Supra). Any ideas?

Did you enable the J29 connection in istagui.ini file? Not sure at which version this is enabled by default.

[iamd]

thanks a lot for sharing

[kurumi]

I seem to have issues connecting to my car using ISTA+ 4.32.15 and my J29 (Toyota Supra). Any ideas?

Did you enable the J29 connection in istagui.ini file? Not sure at which version this is enabled by default.

Thanks. It wasn't enabled by default in the istagui.config file.

Even enabled, there isn't many options to look into sadly.

[humpfry]

Thanks for sharing

[ir655]

I seem to have issues connecting to my car using ISTA+ 4.32.15 and my J29 (Toyota Supra). Any ideas?

Did you enable the J29 connection in istagui.ini file? Not sure at which version this is enabled by default.

Thanks. It wasn't enabled by default in the istagui.config file.

Even enabled, there isn't many options to look into sadly.

Any reason you're running 4.32 version of ISTA and not 4.33 etc? It may work with newer version perhaps?

[czy3807]

its sooooo nice

[CongLock]

This thread issfdsdf for my Standalone Releases, always the latest. HUGE THANKS TO SEDOY FROM CT

If you have no idea how to install ISTA manually, use my installer!!!
AWesome work 
Please don't ask me for anothn be changed in the ISTAGUI.exe.config
* disable CheckSystemRequirements is now possible in ISTAGUI.exe.config
* enable programming with ENET is now possible in ISTAGUI.exe.config (at your own risk.)
* enable Diagnose for J29 (Toyota Supra) is now possible in ISTAGUI.exe.config.
* "Unknown terminal voltage!" message with ENET is fixed, now ISTA check really Voltage, but not display it.
* don't ask me to remove the "Unknown terminal voltage!" message, this is an important message!!!
* read FASTA Data from Vehicle is disabled in ISTAGUI.exe.config
* if you use my Regfiles, open it with Notepad and change the InstallLocation to the right Location on her PC. (not needed with Installer)

- for Diagnose only, necessary SQLiteDBs GLOBAL(required), en-GB(required), de-DE(optional), and BLP(required) in the same Version as App (example 4.25.1x).
- for Programming is SDP needed, using older Versions allowed.

The installer needs this structure (see attachment):
Download directory
|  ista_standalone_installer_4.25.40.exe
|  ISTA_v4.25.40.21875.7z (required)
|  BLP_4.25.40.7z (required)
|  SDP_4.25.40.7z (if needed)
|
\---SQLiteDBs
        EN_4.25.40.7z (required)
        DE_4.25.40.7z (if needed)
        ZH_4.25.40.7z (if needed and if available)
        GLOBAL_4.25.40.7z (required)

Standalone: ISTA 4.25.40.21875 / SQLiteDBs (OTHER,en-GB,de-DE,zh-CN,it-IT) 4.25.40 / BLP 4.25.40 / SDP 4.25.40
Standalone Installer (all above files/dirs must be present in the same directory):  v4.24.40



Standard Tools Installer (Ediabas, INPA, NCS Expertentool, etc. ECU and SGDAT updated with v66.2)
SP-Daten v67.1.006


Tip: to download from Mega use MegaSync with Free/Pro Mega-Account, or jDownloader. MegaSync with free-account will continue after a break, be patient.

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

thank you