We have recieved 85% of our goal ..


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Oem camera X4 G02
#1
Hello Team
Owner of a Bmw x4 G02 M40d end of 2019, I’ve forgotten to order camera when i ordered this car so I bought an oem front&rear camera kit. https://www.phibu-electronics.com/module...2x27746441 Which was working like a charm during 2 years
Last october Bmw recall my car for a software update and after that my camera were not working anymore.
I am newbie in Bmw coding but i am quite sure that i could make these camera work again but for that i need help 

I ve got an Enet cable but i don’t know how to begin

Which program ?
Which option to code ?
An so on…

Please help !

Thanks
Reply
#2
Thats not oem reverse camera. Its plug and play. Check the unit or camera if it maybe disconnected.
Reply
#3
Unit has been sent back to manufacturer, check was done and everything seems to be ok.
Bmw dealer check installation—> ok unit is powered on
image does not appear on screen when reverse gear is engaged


Envoyé de mon iPhone en utilisant Tapatalk
Reply
#4
Try adding 3AG to fa and vo code
Reply
#5
Could you help me on thé was to do this ?
Which program i need to realize that ?
Have you got a tuto for such operation ?

Many thanks for answers


Envoyé de mon iPad en utilisant Tapatalk
Reply
#6
Use esys. Look for tutorial for edit vehicle order.
Reply
#7
Does Esys 2.82 ok or do i need an upper version ?
If so could you help me fond the correct release and loader ?

many thanks


Envoyé de mon iPhone en utilisant Tapatalk
Reply
#8
Use esys 3.90 or 40.2. You can find the esys in this forum. You dont need esys launcher to code this.
Reply
#9
3AG as been added to FA, but that doesn’t solve the problem. no camera activation when rear gear engaged.

Any idea?

regards


Envoyé de mon iPhone en utilisant Tapatalk
Reply
#10
(05-02-2023, 03:15 PM)Rapha65 Wrote: 3AG as been added to FA, but that doesn’t solve the problem. no camera activation when rear gear engaged.

Any idea?

regards


Envoyé de mon iPhone en utilisant Tapatalk
After adding 3AG right click and code the following modules: HU, ICM, REM & FEM
ECU Remap Stage 1 / 2
Checksum Correction
PopCorn / Hard Cut Limiter
ECU Cloning
PopsBangs
Launch Control Activation
E85 Conversion
DPF / EGR / Adblue / NOX / Lambda and many more.
Reply




Users browsing this thread: 1 Guest(s)