Welcome Lights & Low Beam off - LED

[SchlichtM4]

Hello,

Sorry. In advance for the stupid question, but I am brand new and would like to know 
where in e-Sys I can find the FLE settings - I have the LED adaptive headlights.

Under: Read VCM or Read ECU?

I want to turn off the low beam on the welcome light (set from 01 to 00) 
with the following Coding:

FLE (43) -> 3000 -> WELL_LED_INSC_ON -> 00
FLE (43) -> 3000 -> WELL_LWR_INSC_ON -> 00

FLE (44) -> 3000 -> WELL_LED_INSC_ON -> 00
FLE (44) -> 3000 -> WELL_LWR_INSC_ON -> 00

00 = Off, 01= On

Thanks for the help and happy new year.

[DayvG]

Either read VCM or Read ECU should show all of your ECU’s. Read VCM reads the information stored in the VCM and read ECU reads what ECU’s are present. They should in theory be the same. If you don’t see the options you expect, maybe you don’t have the hardware you expect. Post a picture of your SVT tree collapsed so I can see the ECU’s in the car.

[SchlichtM4]

Thank you very much.
I will have a look tomorrow. And then I'll get right back to you.
Thanks for your help.

[SchlichtM4]

So i did it - thx for help - found under ecu FLE(43) and FLE(44) and have coded my LED Lights :-)