01-29-2021, 12:35 AM
Morning guys n gals,
Just joined up as I’ve recently downloaded esys and want to learn how to use it properly before diving in.
I’ve used Carly for coding recently, have some knowledge of Bimmercode but knowing how to code some more advanced stuff would be helpful too. I have dabbled in the past with Vagcom too so have some knowledge of coding stuff to cars.
Current cars in the household are my F36 440i and my missus F57 Cooper.
Is there a literally beginners guide to getting started and a few easy things to code so you can get the hang of it all? I’ve already done some coding on the car with Carly so even undoing those and redoing with esys would be a good starting point I think. Things like alarm beep menu and door lights on in reverse?
I do have some more technical things I’d like to do in time but I’m not going to run before I can walk ?
Just joined up as I’ve recently downloaded esys and want to learn how to use it properly before diving in.
I’ve used Carly for coding recently, have some knowledge of Bimmercode but knowing how to code some more advanced stuff would be helpful too. I have dabbled in the past with Vagcom too so have some knowledge of coding stuff to cars.
Current cars in the household are my F36 440i and my missus F57 Cooper.
Is there a literally beginners guide to getting started and a few easy things to code so you can get the hang of it all? I’ve already done some coding on the car with Carly so even undoing those and redoing with esys would be a good starting point I think. Things like alarm beep menu and door lights on in reverse?
I do have some more technical things I’d like to do in time but I’m not going to run before I can walk ?
![[-]](https://www.bimmerscene.com/images/collapse.png)
![[Image: image.png]](https://static.wixstatic.com/media/eaba4e_4161f6a5d1eb444c976c438b7565cf87~mv2.png/v1/fill/w_122,h_84,al_c,usm_0.66_1.00_0.01,enc_auto/image.png)
