05-20-2021, 11:57 AM
(This post was last modified: 05-20-2021, 02:13 PM by marvel_marv.)
Hi,
I retrofitted the ICAM camera system in my G31. 4x cameras, ICAM module, switch etc. I also bought the UCC (PDC) High module. The system seems to work, BUT.
The issue is the 4 errors for side parking sensors, which doesn't allow the system to start in normal operation.
I did not retrofit them. I do not need nor can justify the cost of the sensors, new bumpers / drilling and adding mounts for them, and the hassle of pulling the wiring all the way through the car.
How to code the system so the cameras work despite the side sensors throwing errors? I'm fairly certain the VO coding is not possible, since:
I am fairly certain it's achievable, since guys in Russia sell retrofit kits without high USS module at all.
Thanks!
I retrofitted the ICAM camera system in my G31. 4x cameras, ICAM module, switch etc. I also bought the UCC (PDC) High module. The system seems to work, BUT.
The issue is the 4 errors for side parking sensors, which doesn't allow the system to start in normal operation.
I did not retrofit them. I do not need nor can justify the cost of the sensors, new bumpers / drilling and adding mounts for them, and the hassle of pulling the wiring all the way through the car.
How to code the system so the cameras work despite the side sensors throwing errors? I'm fairly certain the VO coding is not possible, since:
- 5DN contains parking
- 5DL (Surround View in F series) or ZX3 (dealer code for separate SV in G series) is not accepted when generating the FP from the FA
I am fairly certain it's achievable, since guys in Russia sell retrofit kits without high USS module at all.
Thanks!