BMW ISTA 4.32.15x latest full

[Filipe39]

                BMW ISTA v4.32.15X
                  BLP  4.32.12
                  SDP 4.32.12
                  SQLiteDBS_GLOBAL_EN_DE_4.32.12



you can click reputation for me and thanks if these files help you
                                               

                  thank you all
                  PM password

This Thread is for my Standalone Releases, always latest.

If you have no idea how to install ISTA manually, use my installer!!!
Please don't ask me for another Languages!!!

If someone needs help with ISTA installation, I will only help if you give me the log files.
1. all Logs under ISTA_installfolder\Logs
2. fileextract.log in ISTA_installfolder(if used my Installer)

ISTA Standalone

* Reject fake FSC's can be disabled in ISTAGUI.exe.config, default is active.
* resolution can be changed in the ISTAGUI.exe.config
* disable CheckSystemRequirements is now possible in ISTAGUI.exe.config
* enable programming with ENET is now possible in ISTAGUI.exe.config (at your own risk.)
* enable Diagnose for J29 (Toyota Supra) is now possible in ISTAGUI.exe.config.
* "Unknown terminal voltage!" message with ENET is fixed, now ISTA check really Voltage, but not display it.
* don't ask me to remove "Battery voltage (terminal 30) below threshold value..." message, this is a important message!!!
* read FASTA Data from Vehicle is disabled in ISTAGUI.exe.config
* if you use my Regfiles, open it with Notepad and change the InstallLocation to the right Location on her PC. (not needed with Installer)

- for Diagnose only, neccessary SQLiteDBs GLOBAL(required), en-GB(required), de-DE(optional) and BLP(required) in the same Version as App (example 4.29.2x).
- for Programming is SDP needed, using older Versions allowed.

Installer need this structure (see attachment):
Downloaddirectory
|  ista_standalone_installer_4.29.21.exe
|  ISTA_v4.29.21.23422.7z (required)
|  BLP_4.29.22.7z (required)
|  SDP_4.29.22.7z (if needed)
|  ExecutionBreak_4.28.41.7z (optional and if exist)
|  setup.ini (need to compare files with MD5 hash)
|
\---SQLiteDBs
        EN_4.29.20.7z (required)
        DE_4.29.20.7z (if needed)
        ZH_4.29.20.7z (if needed and if available)
        GLOBAL_4.29.20.7z (required)

Standalone: ISTA 4.29.21.23422 / SQLiteDBs (OTHER,en-GB,de-DE,zh-CN,it-IT) 4.29.20 / BLP 4.29.22 / SDP 4.29.22
Standalone Installer (all above files/dirs must be present in the same directory):  v4.29.21
PSdZData Lite: v4.29.22


Standard Tools Installer (Ediabas, INPA, NCS Expertentool etc. ECU and SGDAT updated with v68.0)
SP-Daten v68.0.800

Hello, please could anyone help me, do i need also that execution break? for this install for exmaple? i have got 4.32.1x downloaded, but there is no execution break.