Adaptive LED issue, switching off after few seconds F82

[timtimer]

Hi guys, hope you’re doing well. Recently driver and passenger seats were changed on F82 model from original to racing seats. E-sys was used to turn off the seat airbags, seat position sensor, etc in order to get rid of the “restraint system fault issue”. However, the adaptive LED headlights stopped working, even tho nothing was changed in the headlight settings in E-sys. After you switch the headlights ON, they start working but after 2-3 seconds they turn off. Also, the turning lights are flocking very fast. Can it be the coding issue (but as I stated before, nothing was changed in the headlight section, only belt tensioner, seat airbag, etc. were changed to “nicht aktive”)? Or it can be a wiring issue as well? I would reallyl appreciate your contribution and help. Below are some headlight related fault codes:
- Headlight driver TSM module left: Coding error
- Headlight driver module TSM, night LIN, no LIN-slave 
- LWR system faulty
- Right side low beam is defective or attempt to reignite the bi-xenon lamp has failed
- Left low beam defective or reigniting of bi-xenon has failed. 
- Steering wheel electronics module (LRE): unexpected LIN slave