We have recieved 81% of our goal ..


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Boot animation problem on MGU screen with NBT EVO
#1
Hi guys


I am asking for your help with a problem I am having on an MGU screen.

I refurbished a G32 MGU screen in my F31, everything works perfectly except for a problem when starting the HU.

The startup animation does not appear, we see the backlight but with a black screen, that's all, then the menu appears, the animation is therefore truncated at startup.

So I think the animation video is not supported by the screen in its current resolution because the screen is 1920x720.

Who would have the path of the boot animations to recover them in SSH?

Thank you in advance for your answers
Reply
#2
Hello.

Startup animation depends on resolution and if the size, format, time, and decoding of animation is not correct, you will see just black screen when HU is booting.

Location is mnt/opt/data/ewa/images/
Just remember make changes in bolomode
[-] The following 3 users say Thank You to rasool376 for this post:
  • juantg93, MachOne, Rob
Reply
#3
Maybe you need do "code" in mgu module with esys.

If you need help you can write me in telegram. Mi user is juantg93

Enviado desde mi SM-G988B mediante Tapatalk
[-] The following 1 user says Thank You to juantg93 for this post:
  • MachOne
Reply
#4
Hello friends, thank you for your answers.

So this path seems to be for still images right?

I'm looking for the way to animation videos.

I have very little knowledge of QNIX (almost zero) so I don't think I know how to make changes to bolomode.

This is only for the MGU screen as I am using it with an NBT EVO, there is no HU MGU in my car, only the screen.

Who can prepare the files for me to replace in the unit?
Reply
#5
(01-20-2022, 08:48 AM)MachOne Wrote: Hello friends, thank you for your answers.

So this path seems to be for still images right?

I'm looking for the way to animation videos.

I have very little knowledge of QNIX (almost zero) so I don't think I know how to make changes to bolomode.

This is only for the MGU screen as I am using it with an NBT EVO, there is no HU MGU in my car, only the screen.

Who can prepare the files for me to replace in the unit?
Hello again. 
I can help you, but first need to check to see there is original files or not.
If files are ok I can prepare you animations
[-] The following 1 user says Thank You to rasool376 for this post:
  • MachOne
Reply
#6
(01-20-2022, 10:38 AM)rasool376 Wrote:
(01-20-2022, 08:48 AM)MachOne Wrote: Hello friends, thank you for your answers.

So this path seems to be for still images right?

I'm looking for the way to animation videos.

I have very little knowledge of QNIX (almost zero) so I don't think I know how to make changes to bolomode.

This is only for the MGU screen as I am using it with an NBT EVO, there is no HU MGU in my car, only the screen.

Who can prepare the files for me to replace in the unit?
Hello again. 
I can help you, but first need to check to see there is original files or not.
If files are ok I can prepare you animations
First of all thank you for your help, the animation videos are also there?

mnt/opt/data/ewa/images/
Reply
#7
(01-20-2022, 12:52 PM)MachOne Wrote:
(01-20-2022, 10:38 AM)rasool376 Wrote:
(01-20-2022, 08:48 AM)MachOne Wrote: Hello friends, thank you for your answers.

So this path seems to be for still images right?

I'm looking for the way to animation videos.

I have very little knowledge of QNIX (almost zero) so I don't think I know how to make changes to bolomode.

This is only for the MGU screen as I am using it with an NBT EVO, there is no HU MGU in my car, only the screen.

Who can prepare the files for me to replace in the unit?
Hello again. 
I can help you, but first need to check to see there is original files or not.
If files are ok I can prepare you animations
First of all thank you for your help, the animation videos are also there?

mnt/opt/data/ewa/images/
Hello. Yes
[-] The following 1 user says Thank You to rasool376 for this post:
  • MachOne
Reply
#8
(01-19-2022, 10:41 PM)rasool376 Wrote: Hello.

Startup animation depends on resolution and if the size, format, time, and decoding of animation is not correct, you will see just black screen when HU is booting.

Location is mnt/opt/data/ewa/images/
Just remember make changes in bolomode
Hi, I don't have the EWA folder, the path does not exist
Reply
#9
(01-24-2022, 05:31 PM)MachOne Wrote:
(01-19-2022, 10:41 PM)rasool376 Wrote: Hello.

Startup animation depends on resolution and if the size, format, time, and decoding of animation is not correct, you will see just black screen when HU is booting.

Location is mnt/opt/data/ewa/images/
Just remember make changes in bolomode
Hi, I don't have the EWA folder, the path does not exist
I can take a look at it if you need and fix it
[-] The following 1 user says Thank You to rasool376 for this post:
  • MachOne
Reply
#10
(01-24-2022, 09:10 PM)rasool376 Wrote:
(01-24-2022, 05:31 PM)MachOne Wrote:
(01-19-2022, 10:41 PM)rasool376 Wrote: Hello.

Startup animation depends on resolution and if the size, format, time, and decoding of animation is not correct, you will see just black screen when HU is booting.

Location is mnt/opt/data/ewa/images/
Just remember make changes in bolomode
Hi, I don't have the EWA folder, the path does not exist
I can take a look at it if you need and fix it
listen, I don't mind, I currently have a 21-11 unit on the bench, with an 8"8 screen, I would like to have this folder found, then also learn how to make changes to the bolomode, then I will know how to make the changes in the unit install in my car, if you are available now let me know, many thanks
Reply




Users browsing this thread: 1 Guest(s)