NBT Retrofits

[ronvo]

Hello guys,

I am upgrading my car with swapping hu_entry to hu_nbt.  What I did was 

In the bottom, add 609 and change 6NH to 6NS. Click apply. Calculate FP again. Save.

Go to Expert Mode >> VCM >> Load the saved FA file in the bottom section, file tab >> Right-click FA and Calculate FP >> Go to VCM Master tab >> write FA FP.

However , when I try to do VO code for HU_NBT and Kombi as those steps bellow

Expert Mode >> Coding >> Read FA (VO) >> Activate FA (VO) >> Read SVT (VCM) >> Left-Click on HU_NBT >> "Detect CAF for SWE" >> Select the latest CAFD displayed >> OK >> Right-Click on HU_NBT (the ECU itself not the underlying CAFD) => CODE


The Detect CAF for SWE is greyed out!! I'm using esys 3.27.1 with 4.43 pdz lite. 

Any info would be appreciated. Thanks.
################################UPDATED##############
UPDATE:

The 3.30 works for me. Thank you guys. However, it still showed BKOMBI not KOMBI. The bluetooth streaming music from phone and aux connected using usb isn't working.


Thanks.

[dmarctwm]

check you inbox

[dazuc]

Use esys 3.31.
3.27.1 has issues with detect caf

[ronvo]

where to download newest esys?