Posts: 1
Threads: 0
Joined: Dec 2022
Reputation:
0
Country: 
Thank you! This is awesome!
![[-]](https://www.bimmerscene.com/images/collapse.png)
•
Posts: 3
Threads: 0
Joined: Dec 2022
Reputation:
0
Country:
(03-28-2020, 10:37 PM)Rob Wrote:
What's Installed?
- Inpa 5.0.6 (with English script files & Support for F-series)
- EDIABAS 7.3.0
- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)
- NCS Dummy 4.0.1
- Tool32 4.0.3
- WinKFP 5.3.1
- Integrated SP-DATEN v53.3
- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)
- USB Drivers for cable
Why is this Beneficial?
- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)
- All the latest versions of the programs in one neat install file
- No hunting or searching for SP-DATENs then struggling to import them
- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.
- System Environment PATH variables taken care of by the installer
- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)
The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.
Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.
You have not unlocked this post's content yet. Please reply to this thread to unlock the content. [/font][/size][/color] Password is bimmerscene.com
The following 1 user says Thank You to alfaohc for this post:1 user says Thank You to alfaohc for this post
• gorez
Posts: 13
Threads: 0
Joined: Sep 2020
Reputation:
0
Country: 
(03-28-2020, 10:37 PM)Rob Wrote:
What's Installed?
- Inpa 5.0.6 (with English script files & Support for F-series)
- EDIABAS 7.3.0
- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)
- NCS Dummy 4.0.1
- Tool32 4.0.3
- WinKFP 5.3.1
- Integrated SP-DATEN v53.3
- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)
- USB Drivers for cable
Why is this Beneficial?
- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)
- All the latest versions of the programs in one neat install file
- No hunting or searching for SP-DATENs then struggling to import them
- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.
- System Environment PATH variables taken care of by the installer
- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)
The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.
Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.
You have not unlocked this post's content yet. Please reply to this thread to unlock the content. [/font][/size][/color] Password is bimmerscene.com
•
Posts: 7
Threads: 0
Joined: Jul 2021
Reputation:
0
Country: 
(03-28-2020, 10:37 PM)Rob Wrote:
What's Installed?
- Inpa 5.0.6 (with English script files & Support for F-series)
- EDIABAS 7.3.0
- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)
- NCS Dummy 4.0.1
- Tool32 4.0.3
- WinKFP 5.3.1
- Integrated SP-DATEN v53.3
- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)
- USB Drivers for cable
Why is this Beneficial?
- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)
- All the latest versions of the programs in one neat install file
- No hunting or searching for SP-DATENs then struggling to import them
- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.
- System Environment PATH variables taken care of by the installer
- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)
The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.
Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.
You have not unlocked this post's content yet. Please reply to this thread to unlock the content. [/font][/size][/color] Password is bimmerscene.com
thank you
•
Posts: 4
Threads: 0
Joined: Dec 2022
Reputation:
0
Country: 
The following 1 user says Thank You to Hestor93 for this post:1 user says Thank You to Hestor93 for this post
• zeer
Posts: 55
Threads: 0
Joined: May 2021
Reputation:
0
Country: 
(03-28-2020, 10:37 PM)Rob Wrote:
What's Installed?
- Inpa 5.0.6 (with English script files & Support for F-series)
- EDIABAS 7.3.0
- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)
- NCS Dummy 4.0.1
- Tool32 4.0.3
- WinKFP 5.3.1
- Integrated SP-DATEN v53.3
- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)
- USB Drivers for cable
Why is this Beneficial?
- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)
- All the latest versions of the programs in one neat install file
- No hunting or searching for SP-DATENs then struggling to import them
- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.
- System Environment PATH variables taken care of by the installer
- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)
The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.
Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.
You have not unlocked this post's content yet. Please reply to this thread to unlock the content. [/font][/size][/color] Password is bimmerscene.com thanks
•
Posts: 3
Threads: 0
Joined: Dec 2022
Reputation:
0
Country:
(03-28-2020, 10:37 PM)Rob Wrote:
What's Installed?
- Inpa 5.0.6 (with English script files & Support for F-series)
- EDIABAS 7.3.0
- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)
- NCS Dummy 4.0.1
- Tool32 4.0.3
- WinKFP 5.3.1
- Integrated SP-DATEN v53.3
- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)
- USB Drivers for cable
Why is this Beneficial?
- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)
- All the latest versions of the programs in one neat install file
- No hunting or searching for SP-DATENs then struggling to import them
- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.
- System Environment PATH variables taken care of by the installer
- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)
The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.
Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.
You have not unlocked this post's content yet. Please reply to this thread to unlock the content. [/font][/size][/color] Password is bimmerscene.com How does going about downloading work? Download isnt visible for me
•
Posts: 7
Threads: 0
Joined: Aug 2021
Reputation:
0
Country: 
12-19-2022, 07:49 PM
(This post was last modified: 12-19-2022, 07:51 PM by Vitaliy.)
(03-28-2020, 10:37 PM)Роб Wrote:
Что установлено?
- Inpa 5.0.6 (с файлами сценариев на английском языке и поддержкой F-серии)
- ЭДИАБАС 7.3.0
- NCS Expert (с меню и кнопками на английском языке и предустановленным профилем NCS Dummy Profile)
- Манекен NCS 4.0.1
- Инструмент32 4.0.3
- WinKFP 5.3.1
- Интегрирован SP-DATEN v53.3
- BMW Coding Tool v2.5.0 (для использования в качестве альтернативы NCS Dummy или для обновления файлов DATEN по мере появления новых)
- Драйверы USB для кабеля
Почему это выгодно?
- Одна установка установит ВСЕ программы, необходимые для кодирования и диагностики, обновит программы, чтобы они отображали меню на английском языке, настроит NCSExpert с правильным профилем NCSDummy, автоматически установит драйверы USB и будет интегрирована с SP-DATEN 53.3 (ДА). , интегрировал!)
- Все последние версии программ в одном аккуратном установочном файле
- Никакой охоты или поиска SP-DATEN, а затем попытки импортировать их
- МАЛЕНЬКИЙ размер файла. Весь пакет весит всего 170 МБ!! Нет необходимости загружать 15 ГБ файлов DATEN.
- Переменные System Environment PATH, о которых заботится установщик
- USB-драйвер включен и автоматически установлен (и сам определил, нужен ли вам 32-битный или 64-битный драйвер)
ЕДИНСТВЕННОЕ, что может потребоваться сделать пользователям, — это перенастроить свой COM-порт на COM1 после установки, но после установки появится файл Readme с простыми инструкциями.
Особая благодарность: Stylinmike из Эдмонтона за создание необходимого инструмента для всех кодировщиков, пытающихся выполнить кодирование E Series без необходимости в массивном файле DATEN, это настолько хорошо, насколько это возможно для упрощения настройки кодирования E Series.
You have not unlocked this post's content yet. Please reply to this thread to unlock the content. [/font][/size][/color] Пароль: bimmerscene.com.
(03-28-2020, 10:37 PM)Роб Wrote:
Что установлено?
- Inpa 5.0.6 (с файлами ошибок на русском языке и поддержкой F-серии)
- ЭДИАБАС 7.3.0
- NCS Expert (с меню и кнопками на русском языке и предустановленным профилем NCS Dummy Profile)
- Манекен NCS 4.0.1
- Инструмент32 4.0.3
- WinKFP 5.3.1
- Интегрирован SP-DATEN v53.3
- BMW Coding Tool v2.5.0 (для использования в качестве альтернативы NCS Dummy или для обновления файлов DATEN по мере обнаружения новых)
- Драйверы USB для кабеля
Почему это выгодно?
- Одна установка устанавливает программу ВСЕ, необходимую для кодирования и диагностики, обновляет программы, чтобы отображать меню на русском языке, настроит NCSExpert с обязательным профилем NCSDummy, автоматически установит драйверы USB и будет интегрирована с SP-DATEN 53.3 (DA). , интегрировал!)
- Все последние версии программ в одном точном установочном файле
- Никакой охоты или поиска SP-DATEN, а из происхождения импортировать их
- МАЛЕНЬКИЙ размер файла. Весь пакет весит всего 170 МБ!! Нет необходимости загружать 15 ГБ файлов DATEN.
- Переменные System Environment PATH, о заботится установщик
- USB-драйвер включен и автоматически установлен (и сам определил, нужен ли вам 32-битный или 64-битный драйвер)
ЕДИНСТВЕННОЕ, что может назначить пользователям, — это перенастроить свой COM-порт на COM1 после установки, но после установки потребуется файл Readme с основными компонентами.
Особая благодарность: Stylinmike от Эдмонтона за создание необходимого инструмента для всех кодировщиков, пытающихся синхронизировать кодирование E Series без необходимости в массивном файле DATEN, это настолько хорошо, насколько это возможно для упрощения кодирования E Series.
You have not unlocked this post's content yet. Please reply to this thread to unlock the content. [/font][/size][/color] Пароль: bimmerscene.com.
Rob thank you!!
•
Posts: 1
Threads: 0
Joined: Dec 2022
Reputation:
0
Country: 
•
Posts: 1
Threads: 0
Joined: Dec 2022
Reputation:
0
Country: 
Thank you! This will be of great help.
•
|
Easy BMW Tools for E Series (NCS EXPERT,INPA,EDIABAS,WINKFP,TOOL 32,NCS DUMMY)
![[Image: untitled.png]](https://img.techpowerup.org/200328/untitled.png)
