Posts: 31
Threads: 1
Joined: Aug 2020
Reputation:
0
Country: 
(04-01-2020, 02:20 AM)boboli Wrote: (03-28-2020, 10:37 PM)Rob Wrote:
What's Installed?
- Inpa 5.0.6 (with English script files & Support for F-series)
- EDIABAS 7.3.0
- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)
- NCS Dummy 4.0.1
- Tool32 4.0.3
- WinKFP 5.3.1
- Integrated SP-DATEN v53.3
- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)
- USB Drivers for cable
Why is this Beneficial?
- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)
- All the latest versions of the programs in one neat install file
- No hunting or searching for SP-DATENs then struggling to import them
- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.
- System Environment PATH variables taken care of by the installer
- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)
The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.
Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.
You have not unlocked this post's content yet. Please reply to this thread to unlock the content. [/font][/size][/color] Password is bimmerscene.com
THANX save time. Regards
![[-]](https://www.bimmerscene.com/images/collapse.png)
•
Posts: 6
Threads: 1
Joined: Feb 2024
Reputation:
0
Country:
(03-28-2020, 10:37 PM)Obrabować Wrote:
Co jest zainstalowane?
- Inpa 5.0.6 (z plikami skryptów w języku angielskim i obsługą serii F)
- EDIABAS 7.3.0
- NCS Expert (z menu i przyciskami w języku angielskim oraz preinstalowanym profilem NCS Dummy Profile)
- NCS Dummy 4.0.1
- Narzędzie32 4.0.3
- WinKFP 5.3.1
- Zintegrowany SP-DATEN v53.3
- BMW Coding Tool v2.5.0 (do użytku jako alternatywa dla NCS Dummy lub do aktualizacji plików DATEN w miarę pojawiania się nowych)
- Sterowniki USB do kabla
Dlaczego jest to korzystne?
- Jedna pojedyncza instalacja zainstaluje WSZYSTKIE programy potrzebne do kodowania i diagnostyki, zaktualizuje programy, aby wyświetlały menu w języku angielskim, skonfiguruje NCSExpert z prawidłowym profilem NCSDummy, automatycznie zainstaluje sterowniki USB i jest zintegrowany z SP-DATEN 53.3 (TAK , Zintegrowany!)
- Wszystkie najnowsze wersje programów w jednym zgrabnym pliku instalacyjnym
- Żadnych polowań i poszukiwań SP-DATEN, a następnie prób ich importowania
- MAŁY rozmiar pliku. Cały pakiet waży tylko 170MB!! Nie ma potrzeby pobierania 15 GB plików DATEN.
- Zmienne środowiska systemowego PATH obsługiwane przez instalatora
- Dołączony i automatycznie zainstalowany sterownik USB (i sprawdza, czy potrzebujesz samego sterownika 32-bitowego czy 64-bitowego)
JEDYNĄ rzeczą, którą użytkownicy mogą potrzebować, jest ponowna konfiguracja portu COM na COM1 po instalacji, ale po instalacji pojawia się plik Readme z prostymi instrukcjami.
Specjalne podziękowania: stylinmike'owi z Edmonton za stworzenie niezbędnego narzędzia dla wszystkich programistów próbujących kodować w serii E bez konieczności używania ogromnego pliku DATEN. Jest to tak dobre, jak to tylko możliwe, jeśli chodzi o łatwą konfigurację kodowania w serii E.
[ukryj]Treść jest ukryta! Aby go wyświetlić, sprawdź oryginalny post.[/hide][/font][/size][/color]
Hasło to bimmerscene.com
THANKS MANN
•
Posts: 1
Threads: 0
Joined: Apr 2024
Reputation:
0
Country: 
Thank You for providing this information
•
Posts: 9
Threads: 0
Joined: Apr 2024
Reputation:
0
Country: 
•
Posts: 5
Threads: 0
Joined: Oct 2022
Reputation:
0
Country: 
(03-28-2020, 10:37 PM)Rob Wrote:
What's Installed?
- Inpa 5.0.6 (with English script files & Support for F-series)
- EDIABAS 7.3.0
- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)
- NCS Dummy 4.0.1
- Tool32 4.0.3
- WinKFP 5.3.1
- Integrated SP-DATEN v53.3
- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)
- USB Drivers for cable
Why is this Beneficial?
- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)
- All the latest versions of the programs in one neat install file
- No hunting or searching for SP-DATENs then struggling to import them
- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.
- System Environment PATH variables taken care of by the installer
- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)
The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.
Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.
You have not unlocked this post's content yet. Please reply to this thread to unlock the content. [/font][/size][/color] Password is bimmerscene.com Thanks a lot
•
Posts: 3
Threads: 0
Joined: Apr 2024
Reputation:
0
Country: 
(03-28-2020, 10:37 PM)Rob Wrote:
What's Installed?
- Inpa 5.0.6 (with English script files & Support for F-series)
- EDIABAS 7.3.0
- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)
- NCS Dummy 4.0.1
- Tool32 4.0.3
- WinKFP 5.3.1
- Integrated SP-DATEN v53.3
- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)
- USB Drivers for cable
Why is this Beneficial?
- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)
- All the latest versions of the programs in one neat install file
- No hunting or searching for SP-DATENs then struggling to import them
- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.
- System Environment PATH variables taken care of by the installer
- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)
The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.
Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.
You have not unlocked this post's content yet. Please reply to this thread to unlock the content. [/font][/size][/color] Password is bimmerscene.com Thank
•
Posts: 2
Threads: 1
Joined: Apr 2024
Reputation:
0
Country:
(04-08-2024, 04:41 AM)akkrawut2513 Wrote: (03-28-2020, 10:37 PM)Rob Wrote:
What's Installed?
- Inpa 5.0.6 (with English script files & Support for F-series)
- EDIABAS 7.3.0
- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)
- NCS Dummy 4.0.1
- Tool32 4.0.3
- WinKFP 5.3.1
- Integrated SP-DATEN v53.3
- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)
- USB Drivers for cable
Why is this Beneficial?
- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)
- All the latest versions of the programs in one neat install file
- No hunting or searching for SP-DATENs then struggling to import them
- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.
- System Environment PATH variables taken care of by the installer
- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)
The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.
Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.
You have not unlocked this post's content yet. Please reply to this thread to unlock the content. [/font][/size][/color] Password is bimmerscene.com
This is very useful, thank you!!
•
Posts: 1
Threads: 0
Joined: Apr 2024
Reputation:
0
Country: 
(03-28-2020, 10:37 PM)Rob Wrote:
What's Installed?
- Inpa 5.0.6 (with English script files & Support for F-series)
- EDIABAS 7.3.0
- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)
- NCS Dummy 4.0.1
- Tool32 4.0.3
- WinKFP 5.3.1
- Integrated SP-DATEN v53.3
- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)
- USB Drivers for cable
Why is this Beneficial?
- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)
- All the latest versions of the programs in one neat install file
- No hunting or searching for SP-DATENs then struggling to import them
- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.
- System Environment PATH variables taken care of by the installer
- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)
The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.
Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.
You have not unlocked this post's content yet. Please reply to this thread to unlock the content. [/font][/size][/color] Password is bimmerscene.com
Thanks mate! Really nice!
•
Posts: 3
Threads: 0
Joined: Apr 2024
Reputation:
0
Country: 
•
Posts: 1
Threads: 0
Joined: Apr 2024
Reputation:
0
Country: 
•
|
![[Image: untitled.png]](https://img.techpowerup.org/200328/untitled.png)
