Posts: 46
Threads: 0
Joined: Apr 2023
Reputation:
0
Country: 
(03-28-2020, 10:37 PM)Rob Wrote:
What's Installed?
- Inpa 5.0.6 (with English script files & Support for F-series)
- EDIABAS 7.3.0
- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)
- NCS Dummy 4.0.1
- Tool32 4.0.3
- WinKFP 5.3.1
- Integrated SP-DATEN v53.3
- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)
- USB Drivers for cable
Why is this Beneficial?
- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)
- All the latest versions of the programs in one neat install file
- No hunting or searching for SP-DATENs then struggling to import them
- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.
- System Environment PATH variables taken care of by the installer
- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)
The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.
Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.
You have not unlocked this post's content yet. Please reply to this thread to unlock the content. Password is bimmerscene.com danke
![[-]](https://www.bimmerscene.com/images/collapse.png)
•
Posts: 3
Threads: 0
Joined: Dec 2023
Reputation:
0
Country: 
•
Posts: 1
Threads: 0
Joined: Dec 2023
Reputation:
0
Country: 
(03-28-2020, 10:37 PM)Rob, link please? Wrote:
What's Installed?
- Inpa 5.0.6 (with English script files & Support for F-series)
- EDIABAS 7.3.0
- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)
- NCS Dummy 4.0.1
- Tool32 4.0.3
- WinKFP 5.3.1
- Integrated SP-DATEN v53.3
- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)
- USB Drivers for cable
Why is this Beneficial?
- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)
- All the latest versions of the programs in one neat install file
- No hunting or searching for SP-DATENs then struggling to import them
- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.
- System Environment PATH variables taken care of by the installer
- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)
The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.
Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.
You have not unlocked this post's content yet. Please reply to this thread to unlock the content. [/font][/size][/color] Password is bimmerscene.com
•
Posts: 15
Threads: 0
Joined: Jul 2023
Reputation:
1
Country:
12-26-2023, 11:44 PM
(This post was last modified: 12-26-2023, 11:47 PM by Malakas.)
(03-28-2020, 10:37 PM)Rob Wrote:
What's Installed?
- Inpa 5.0.6 (with English script files & Support for F-series)
- EDIABAS 7.3.0
- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)
- NCS Dummy 4.0.1
- Tool32 4.0.3
- WinKFP 5.3.1
- Integrated SP-DATEN v53.3
- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)
- USB Drivers for cable
Why is this Beneficial?
- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)
- All the latest versions of the programs in one neat install file
- No hunting or searching for SP-DATENs then struggling to import them
- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.
- System Environment PATH variables taken care of by the installer
- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)
The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.
Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.
You have not unlocked this post's content yet. Please reply to this thread to unlock the content. [/font][/size][/color] Password is bimmerscene.com thank you very much! Its much appreciated!
thank you very much! Its much appreciated!
•
Posts: 2
Threads: 0
Joined: Dec 2023
Reputation:
0
Country: 
(12-26-2023, 11:44 PM)Malakas Wrote: (03-28-2020, 10:37 PM)Rob Wrote:
What's Installed?
- Inpa 5.0.6 (with English script files & Support for F-series)
- EDIABAS 7.3.0
- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)
- NCS Dummy 4.0.1
- Tool32 4.0.3
- WinKFP 5.3.1
- Integrated SP-DATEN v53.3
- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)
- USB Drivers for cable
Why is this Beneficial?
- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)
- All the latest versions of the programs in one neat install file
- No hunting or searching for SP-DATENs then struggling to import them
- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.
- System Environment PATH variables taken care of by the installer
- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)
The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.
Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.
You have not unlocked this post's content yet. Please reply to this thread to unlock the content. [/font][/size][/color] Password is bimmerscene.com thank you very much! Its much appreciated!
thank you very much! Its much appreciated!
•
Posts: 1
Threads: 0
Joined: Dec 2023
Reputation:
0
Country: 
•
Posts: 9
Threads: 0
Joined: Nov 2023
Reputation:
0
Country: 
(04-05-2020, 07:10 PM)THANKSDoru Wrote: (03-28-2020, 10:37 PM)ObrigadoRob Wrote:
O que está instalado?
- Inpa 5.0.6 (com arquivos de script em inglês e suporte para série F)
-EDIABAS 7.3.0
- NCS Expert (com menus e botões em inglês e NCS Dummy Profile pré-instalado)
- Manequim NCS 4.0.1
- Ferramenta32 4.0.3
-WinKFP 5.3.1
-SP-DATEN v53.3 integrado
- BMW Coding Tool v2.5.0 (para uso como alternativa ao NCS Dummy ou para atualizar arquivos DATEN à medida que novos forem disponibilizados)
- Drivers USB para cabo
Por que isso é benéfico?
- Uma única instalação instalará TODOS os programas necessários para codificação e diagnóstico, atualizará os programas para mostrar menus em inglês, configurará o NCSExpert com o perfil NCSDummy correto, instalará automaticamente os drivers USB e vem integrado com SP-DATEN 53.3 (SIM , Integrado!)
- Todas as versões mais recentes dos programas em um arquivo de instalação elegante
- Não é necessário procurar ou procurar SP-DATENs e depois ter dificuldade para importá-los
- Tamanho de arquivo PEQUENO. O pacote completo tem apenas 170 MB!! Não há necessidade de baixar 15 GB de arquivos DATEN.
- Variáveis PATH do ambiente do sistema cuidadas pelo instalador
- Driver USB incluído e instalado automaticamente (e descobri se você precisa do driver de 32 ou 64 bits sozinho)
A ÚNICA coisa que os usuários podem precisar fazer é reconfigurar sua porta COM para COM1 após a instalação, mas um arquivo Leiame aparece após a instalação com instruções simples.
Crédito especial: para Stylinmike de Edmonton por criar uma ferramenta essencial para todos os codificadores que tentam realizar a codificação da Série E sem a necessidade de um arquivo DATEN enorme, isso é o melhor que existe para a configuração de codificação da Série E ser facilitada.
[ocultar]O conteúdo está oculto! Verifique a postagem original para visualizá-la.[/hide][/font][/size][/color]
A senha é bimmerscene.com
•
Posts: 21
Threads: 2
Joined: Dec 2023
Reputation:
0
Country:
•
Posts: 10
Threads: 1
Joined: Dec 2023
Reputation:
0
Country: 
•
|
![[Image: untitled.png]](https://img.techpowerup.org/200328/untitled.png)
