Posts: 3
Threads: 0
Joined: Jan 2024
Reputation:
0
Country: 
(03-28-2020, 10:37 PM)Rob Wrote:
What's Installed?
- Inpa 5.0.6 (with English script files & Support for F-series)
- EDIABAS 7.3.0
- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)
- NCS Dummy 4.0.1
- Tool32 4.0.3
- WinKFP 5.3.1
- Integrated SP-DATEN v53.3
- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)
- USB Drivers for cable
Why is this Beneficial?
- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)
- All the latest versions of the programs in one neat install file
- No hunting or searching for SP-DATENs then struggling to import them
- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.
- System Environment PATH variables taken care of by the installer
- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)
The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.
Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.
You have not unlocked this post's content yet. Please reply to this thread to unlock the content. [/font][/size][/color] Password is bimmerscene.com
Merci BG
![[-]](https://www.bimmerscene.com/images/collapse.png)
•
Posts: 8
Threads: 0
Joined: Jan 2024
Reputation:
0
Country: 
thank you very much for post
•
Posts: 1
Threads: 0
Joined: Jan 2024
Reputation:
0
Country: 
(01-08-2024, 06:20 PM)Přehrady78 Wrote: (03-28-2020, 10:37 PM)Okrást Wrote:
Co je nainstalováno?
- Inpa 5.0.6 (se soubory anglických skriptů a podporou pro F-series)
- EDIABAS 7.3.0
- NCS Expert (s anglickými nabídkami a tlačítky a předinstalovaným NCS Dummy Profile)
- Dummy NCS 4.0.1
- Tool32 4.0.3
- WinKFP 5.3.1
- Integrovaný SP-DATEN v53.3
- BMW Coding Tool v2.5.0 (pro použití jako alternativa k NCS Dummy nebo k aktualizaci souborů DATEN, jakmile budou k dispozici nové)
- USB ovladače pro kabel
Proč je to výhodné?
- Jedna jediná instalace nainstaluje VŠECHNY programy potřebné pro kódování a diagnostiku, aktualizuje programy tak, aby zobrazovaly anglické nabídky, nastaví NCSExpert se správným profilem NCSDummy, automaticky nainstaluje ovladače USB a je integrována s SP-DATEN 53.3 (ANO , Integrovaný!)
- Všechny nejnovější verze programů v jednom přehledném instalačním souboru
- Žádné lovy nebo hledání SP-DATEN a jejich importování
- SMALL velikost souboru. Celý balíček má pouze 170 MB!! Není třeba stahovat 15 GB souborů DATEN.
- Systémové prostředí PATH proměnné, o které se stará instalační program
- Ovladač USB je součástí dodávky a automaticky se nainstaluje (a zjistí se, zda potřebujete 32bitový nebo 64bitový ovladač sám)
Jediná věc, kterou mohou uživatelé po instalaci udělat, je překonfigurovat svůj COM port na COM1, ale po instalaci se objeví soubor Readme s jednoduchými pokyny.
Zvláštní uznání: Stylinmike z Edmontonu za vytvoření základního nástroje pro všechny kodéry, kteří se snaží dosáhnout kódování řady E, aniž by potřebovali velký soubor DATEN, je to tak dobré, jak to může být pro snadné nastavení kódování řady E.
[skrýt]Obsah je skrytý! Chcete-li jej zobrazit, zkontrolujte původní příspěvek.[/hide][/font][/size][/color]
Heslo je bimmerscene.com
Děkuji Tome
•
Posts: 5
Threads: 0
Joined: Jan 2024
Reputation:
0
Country: 
01-09-2024, 09:50 AM
(This post was last modified: 01-09-2024, 09:52 AM by ognyan.vladimirov@edu.mon.bg.)
(03-28-2020, 10:37 PM)Rob Wrote:
What's Installed?
- Inpa 5.0.6 (with English script files & Support for F-series)
- EDIABAS 7.3.0
- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)
- NCS Dummy 4.0.1
- Tool32 4.0.3
- WinKFP 5.3.1
- Integrated SP-DATEN v53.3
- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)
- USB Drivers for cable
Why is this Beneficial?
- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)
- All the latest versions of the programs in one neat install file
- No hunting or searching for SP-DATENs then struggling to import them
- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.
- System Environment PATH variables taken care of by the installer
- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)
The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.
Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.
You have not unlocked this post's content yet. Please reply to this thread to unlock the content. [/font][/size][/color] Password is bimmerscene.com
thanks
(03-28-2020, 10:37 PM)Rob Wrote:
What's Installed?
- Inpa 5.0.6 (with English script files & Support for F-series)
- EDIABAS 7.3.0
- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)
- NCS Dummy 4.0.1
- Tool32 4.0.3
- WinKFP 5.3.1
- Integrated SP-DATEN v53.3
- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)
- USB Drivers for cable
Why is this Beneficial?
- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)
- All the latest versions of the programs in one neat install file
- No hunting or searching for SP-DATENs then struggling to import them
- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.
- System Environment PATH variables taken care of by the installer
- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)
The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.
Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.
You have not unlocked this post's content yet. Please reply to this thread to unlock the content. Password is bimmerscene.com
thanks
•
Posts: 23
Threads: 0
Joined: Sep 2022
Reputation:
0
Country: 
(03-28-2020, 10:37 PM)Rob Wrote: ![[Image: untitled.png]](https://img.techpowerup.org/200328/untitled.png) thanks What's Installed?
- Inpa 5.0.6 (with English script files & Support for F-series)
- EDIABAS 7.3.0
- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)
- NCS Dummy 4.0.1
- Tool32 4.0.3
- WinKFP 5.3.1
- Integrated SP-DATEN v53.3
- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)
- USB Drivers for cable
Why is this Beneficial?
- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)
- All the latest versions of the programs in one neat install file
- No hunting or searching for SP-DATENs then struggling to import them
- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.
- System Environment PATH variables taken care of by the installer
- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)
The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.
Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.
You have not unlocked this post's content yet. Please reply to this thread to unlock the content. [/font][/size][/color] Password is bimmerscene.com
•
Posts: 2
Threads: 0
Joined: Dec 2023
Reputation:
0
Country:
01-09-2024, 02:57 PM
(This post was last modified: 01-09-2024, 02:59 PM by chrisy2032.)
(02-17-2022, 11:32 AM)Math Wrote: (03-28-2020, 10:37 PM)Rob Wrote:
What's Installed?
- Inpa 5.0.6 (with English script files & Support for F-series)
- EDIABAS 7.3.0
- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)
- NCS Dummy 4.0.1
- Tool32 4.0.3
- WinKFP 5.3.1
- Integrated SP-DATEN v53.3
- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)
- USB Drivers for cable
Why is this Beneficial?
- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)
- All the latest versions of the programs in one neat install file
- No hunting or searching for SP-DATENs then struggling to import them
- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.
- System Environment PATH variables taken care of by the installer
- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)
The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.
Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.
You have not unlocked this post's content yet. Please reply to this thread to unlock the content. [/font][/size][/color] Password is bimmerscene.com
(02-17-2022, 11:32 AM)Math Wrote: (03-28-2020, 10:37 PM)Rob Wrote:
What's Installed?
- Inpa 5.0.6 (with English script files & Support for F-series)
- EDIABAS 7.3.0
- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)
- NCS Dummy 4.0.1
- Tool32 4.0.3
- WinKFP 5.3.1
- Integrated SP-DATEN v53.3
- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)
- USB Drivers for cable
Why is this Beneficial?
- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)
- All the latest versions of the programs in one neat install file
- No hunting or searching for SP-DATENs then struggling to import them
- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.
- System Environment PATH variables taken care of by the installer
- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)
The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.
Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.
You have not unlocked this post's content yet. Please reply to this thread to unlock the content. [/font][/size][/color] Password is bimmerscene.com Thank you
•
Posts: 12
Threads: 0
Joined: Jan 2024
Reputation:
0
Country: 
•
Posts: 1
Threads: 0
Joined: Jan 2024
Reputation:
0
Country: 
Just what I was looking for, Thank!
•
Posts: 13
Threads: 0
Joined: Dec 2023
Reputation:
0
Country:
(04-01-2020, 02:20 AM)boboli Wrote: (03-28-2020, 10:37 PM)Rob Wrote:
What's Installed?
- Inpa 5.0.6 (with English script files & Support for F-series)
- EDIABAS 7.3.0
- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)
- NCS Dummy 4.0.1
- Tool32 4.0.3
- WinKFP 5.3.1
- Integrated SP-DATEN v53.3
- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)
- USB Drivers for cable
Why is this Beneficial?
- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)
- All the latest versions of the programs in one neat install file
- No hunting or searching for SP-DATENs then struggling to import them
- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.
- System Environment PATH variables taken care of by the installer
- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)
The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.
Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.
You have not unlocked this post's content yet. Please reply to this thread to unlock the content. [/font][/size][/color] Password is bimmerscene.com thx
•
Posts: 1
Threads: 0
Joined: Jan 2024
Reputation:
0
Country: 
thank you very much for your help!
•
|
