Posts: 52
Threads: 0
Joined: Oct 2022
Reputation:
0
Country: 
(03-28-2020, 10:37 PM)Rob Wrote:
What's Installed?
- Inpa 5.0.6 (with English script files & Support for F-series)
- EDIABAS 7.3.0
- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)
- NCS Dummy 4.0.1
- Tool32 4.0.3
- WinKFP 5.3.1
- Integrated SP-DATEN v53.3
- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)
- USB Drivers for cable
Why is this Beneficial?
- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)
- All the latest versions of the programs in one neat install file
- No hunting or searching for SP-DATENs then struggling to import them
- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.
- System Environment PATH variables taken care of by the installer
- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)
The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.
Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.
You have not unlocked this post's content yet. Please reply to this thread to unlock the content. [/font][/size][/color] Password is bimmerscene.com
![[-]](https://www.bimmerscene.com/images/collapse.png)
•
Posts: 94
Threads: 0
Joined: Sep 2020
Reputation:
2
Country: 
(03-28-2020, 10:37 PM)Rob Wrote:
What's Installed?
- Inpa 5.0.6 (with English script files & Support for F-series)
- EDIABAS 7.3.0
- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)
- NCS Dummy 4.0.1
- Tool32 4.0.3
- WinKFP 5.3.1
- Integrated SP-DATEN v53.3
- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)
- USB Drivers for cable
Why is this Beneficial?
- Una singola installazione installerà TUTTI i programmi necessari per la codifica e la diagnosi, aggiornerà i programmi per mostrare i menu in inglese, configurerà NCSExpert con il profilo NCSDummy corretto, installerà automaticamente i driver USB e verrà integrato con SP-DATEN 53.3 (SI , integrato!)
- Tutte le ultime versioni dei programmi in un unico file di installazione
- Nessuna ricerca o ricerca di SP-DATEN, quindi difficoltà a importarli
- Dimensioni del file PICCOLE. L'intero pacchetto è di soli 170 MB!! Non è necessario scaricare 15 GB di file DATEN.
- Variabili PATH dell'ambiente di sistema curate dall'installatore
- Driver USB incluso e installato automaticamente (e ha capito se è necessario il driver a 32 bit o 64 bit da solo)
L'UNICA cosa che gli utenti potrebbero dover fare è riconfigurare la loro porta COM in modo che sia COM1 dopo l'installazione, ma dopo l'installazione viene visualizzato un file Leggimi con semplici istruzioni.
Credito speciale: per ritirare lo stile da Edmonton per aver creato uno strumento essenziale per tutti i programmatori che cercano di realizzare la codifica della serie E senza la necessità di un file DATEN di grandi dimensioni, questo è quanto di meglio si ottiene per l'impostazione della codifica della serie E semplificata.
You have not unlocked this post's content yet. Please reply to this thread to unlock the content. [/font][/size][/color] La password è bimmerscene.com Thanks
•
Posts: 21
Threads: 0
Joined: Oct 2022
Reputation:
0
Country: 
(03-28-2020, 10:37 PM)Rob Wrote:
What's Installed?
- Inpa 5.0.6 (with English script files & Support for F-series)
- EDIABAS 7.3.0
- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)
- NCS Dummy 4.0.1
- Tool32 4.0.3
- WinKFP 5.3.1
- Integrated SP-DATEN v53.3
- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)
- USB Drivers for cable
Why is this Beneficial?
- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)
- All the latest versions of the programs in one neat install file
- No hunting or searching for SP-DATENs then struggling to import them
- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.
- System Environment PATH variables taken care of by the installer
- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)
The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.
Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.
You have not unlocked this post's content yet. Please reply to this thread to unlock the content. [/font][/size][/color] Password is bimmerscene.com
•
Posts: 14
Threads: 0
Joined: Mar 2021
Reputation:
1
Country: 
thanks really appreaciated
•
Posts: 6
Threads: 1
Joined: Jan 2021
Reputation:
0
Country:
thank you for your upload !!
•
Posts: 30
Threads: 0
Joined: Oct 2022
Reputation:
0
Country: 
(03-28-2020, 10:37 PM)Rob Wrote:
What's Installed?
- Inpa 5.0.6 (with English script files & Support for F-series)
- EDIABAS 7.3.0
- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)
- NCS Dummy 4.0.1
- Tool32 4.0.3
- WinKFP 5.3.1
- Integrated SP-DATEN v53.3
- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)
- USB Drivers for cable
Why is this Beneficial?
- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)
- All the latest versions of the programs in one neat install file
- No hunting or searching for SP-DATENs then struggling to import them
- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.
- System Environment PATH variables taken care of by the installer
- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)
The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.
Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.
You have not unlocked this post's content yet. Please reply to this thread to unlock the content. [/font][/size][/color] Password is bimmerscene.com Tanks a lot !
•
Posts: 3
Threads: 1
Joined: Oct 2022
Reputation:
0
Country:
(03-28-2020, 10:37 PM)Rob Wrote:
What's Installed?
- Inpa 5.0.6 (with English script files & Support for F-series)
- EDIABAS 7.3.0
- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)
- NCS Dummy 4.0.1
- Tool32 4.0.3
- WinKFP 5.3.1
- Integrated SP-DATEN v53.3
- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)
- USB Drivers for cable
Why is this Beneficial?
- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)
- All the latest versions of the programs in one neat install file
- No hunting or searching for SP-DATENs then struggling to import them
- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.
- System Environment PATH variables taken care of by the installer
- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)
The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.
Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.
You have not unlocked this post's content yet. Please reply to this thread to unlock the content. [/font][/size][/color] Password is bimmerscene.com
Thanks 
•
Posts: 1
Threads: 0
Joined: Oct 2022
Reputation:
0
Country: 
Thanks a lot duder. much appreciated
•
Posts: 42
Threads: 1
Joined: Jun 2020
Reputation:
0
Country:
(03-28-2020, 10:37 PM)Rob Wrote:
What's Installed?
- Inpa 5.0.6 (with English script files & Support for F-series)
- EDIABAS 7.3.0
- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)
- NCS Dummy 4.0.1
- Tool32 4.0.3
- WinKFP 5.3.1
- Integrated SP-DATEN v53.3
- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)
- USB Drivers for cable
Why is this Beneficial?
- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)
- All the latest versions of the programs in one neat install file
- No hunting or searching for SP-DATENs then struggling to import them
- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.
- System Environment PATH variables taken care of by the installer
- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)
The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.
Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.
You have not unlocked this post's content yet. Please reply to this thread to unlock the content. [/font][/size][/color] Password is bimmerscene.com thank you ROB
•
Posts: 16
Threads: 0
Joined: Jan 2021
Reputation:
0
Country: 
(03-28-2020, 10:37 PM)Rob Wrote:
What's Installed?
- Inpa 5.0.6 (with English script files & Support for F-series)
- EDIABAS 7.3.0
- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)
- NCS Dummy 4.0.1
- Tool32 4.0.3
- WinKFP 5.3.1
- Integrated SP-DATEN v53.3
- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)
- USB Drivers for cable
Why is this Beneficial?
- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)
- All the latest versions of the programs in one neat install file
- No hunting or searching for SP-DATENs then struggling to import them
- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.
- System Environment PATH variables taken care of by the installer
- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)
The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.
Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.
You have not unlocked this post's content yet. Please reply to this thread to unlock the content. [/font][/size][/color] Password is bimmerscene.com FINALLY THANKS
•
|
![[Image: untitled.png]](https://img.techpowerup.org/200328/untitled.png)
