Easy BMW Tools for E Series (NCS EXPERT,INPA,EDIABAS,WINKFP,TOOL 32,NCS DUMMY)

[Sanja550i]

thank you for sharing

[WaliedJackson]

What's Installed?

- Inpa 5.0.6 (with English script files & Support for F-series)

- EDIABAS 7.3.0

- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)

- NCS Dummy 4.0.1

- Tool32 4.0.3

- WinKFP 5.3.1

- Integrated SP-DATEN v53.3

- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)

- USB Drivers for cable

Why is this Beneficial?

- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)

- All the latest versions of the programs in one neat install file

- No hunting or searching for SP-DATENs then struggling to import them

- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.

- System Environment PATH variables taken care of by the installer

- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)

The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.

Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

[/font][/size][/color]

Password is bimmerscene.com

Thanks for all!!

Thank you

[motiejus]

Thanks for sharing!

[dmaster]

thanks for sharing

[Dfk332]

What's Installed?

- Inpa 5.0.6 (with English script files & Support for F-series)

- EDIABAS 7.3.0

- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)

- NCS Dummy 4.0.1

- Tool32 4.0.3

- WinKFP 5.3.1

- Integrated SP-DATEN v53.3

- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)

- USB Drivers for cable
Thanks 

Why is this Beneficial?

- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)

- All the latest versions of the programs in one neat install file

- No hunting or searching for SP-DATENs then struggling to import them

- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.

- System Environment PATH variables taken care of by the installer

- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)

The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.

Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

[/font][/size][/color]

Password is bimmerscene.com

[User55]

Dziękuję za udostępnienie.

[xyerua]

muchas gracias!

[BMWE60user]

Thank you!! It is very useful

[luggy-fritz]

Was ist installiert?

- Inpa 5.0.6 (mit englischen Skriptdateien und Unterstützung für F-Serie)

- EDIABAS 7.3.0

- NCS Expert (mit englischen Menüs und Schaltflächen und vorinstalliertem NCS Dummy Profile)

- NCS-Dummy 4.0.1

- Tool32 4.0.3

- WinKFP 5.3.1

- Integrierte SP-DATEN v53.3

- BMW Coding Tool v2.5.0 (zur Verwendung als Alternative zu NCS Dummy oder zum Aktualisieren von DATEN-Dateien, sobald neue verfügbar sind)

- USB-Treiber für Kabel

Warum ist das von Vorteil?

- Eine einzige Installation installiert ALLE für die Codierung und Diagnose erforderlichen Programme, aktualisiert die Programme, um englische Menüs anzuzeigen, richtet NCSExpert mit dem richtigen NCSDummy-Profil ein, installiert automatisch USB-Treiber und ist in SP-DATEN 53.3 integriert (JA). , Integriert!)

- Alle neuesten Versionen der Programme in einer übersichtlichen Installationsdatei

- Kein Suchen oder Suchen nach SP-DATENs und anschließendes mühsames Importieren

- KLEINE Dateigröße. Das gesamte Paket ist nur 170 MB groß!! Es ist nicht erforderlich, 15 GB DATEN-Dateien herunterzuladen.

- PATH-Variablen der Systemumgebung, die vom Installationsprogramm verwaltet werden

- USB-Treiber enthalten und automatisch installiert (und herausgefunden, ob Sie den 32-Bit- oder 64-Bit-Treiber selbst benötigen)

Das EINZIGE, was Benutzer möglicherweise tun müssen, ist, ihren COM-Port nach der Installation auf COM1 neu zu konfigurieren. Nach der Installation wird jedoch eine Readme-Datei mit einfachen Anweisungen angezeigt.

Besonderer Dank geht an stylinmike aus Edmonton für die Entwicklung eines unverzichtbaren Tools für alle Programmierer, die die E-Serie-Codierung durchführen möchten, ohne eine umfangreiche DATEN-Datei zu benötigen. Dies ist das Beste, was es für die Einrichtung der E-Serie-Codierung mit Leichtigkeit gibt.

[verstecken]Inhalt ist ausgeblendet! Bitte überprüfen Sie den Originalbeitrag, um ihn anzuzeigen.[/hide][/font][/size][/color]

Das Passwort lautet bimmerscene.com

[tevinforever]

What's Installed?

- Inpa 5.0.6 (with English script files & Support for F-series)

- EDIABAS 7.3.0

- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)

- NCS Dummy 4.0.1

- Tool32 4.0.3

- WinKFP 5.3.1

- Integrated SP-DATEN v53.3

- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)

- USB Drivers for cable

Why is this Beneficial?

- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)

- All the latest versions of the programs in one neat install file

- No hunting or searching for SP-DATENs then struggling to import them

- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.

- System Environment PATH variables taken care of by the installer

- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)

The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.

Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

[/font][/size][/color]

Password is bimmerscene.com

thank you

---

thank you!!!!!!!!!!!!!!!!!!!!!