HU-H B7F87A HU-H Theft-proofing mode active

[ivannw]

Hi all, I have a NBT EVO here that is recusing the Map FSC. I have added FSCs using FEMToEvo but no success. After check on ISTA the error HU-H Theft-proofing mode active is present on NBT. 

Can you help me with this?

Is this component protection?

[Codemybimmer]

You need the 170 FSC from FEMTO to turn off Component Protection.

[TSTE1982]

I currently have the same problem on a friends car.
I tried adding 170 FSC but it gets rejected. All other FSC get cancelled.

Has anybody a clue how to solve this?

[chang2]

I currently have the same problem on a friends car.
I tried adding 170 FSC but it gets rejected. All other FSC get cancelled.

Has anybody a clue how to solve this?

what kind of patch did you use?

with Hu Pro or HU Engineering it is not a problem.

[TSTE1982]

the friend used hutool 2.6 first. then after a few days it engaged the cp.

i used hu engineering and it came up with the error, that upload of fsc 170 failed.

even clear swt and complete patch didn’t help.

that unit doesn’t accept the fsc 170.

[chang2]

Hello,

You are not allowed to mix the patch!

flash the device with botld and use original products, no cracked versions. Then everything will work.