(03-19-2023, 09:24 AM)Blackbird_84 Wrote: Hello, do you know the paths of the folders in ista, to manually update the SDP and BLP (4.40..)?
Thanks you
C:/EC-apps/ISTA/Psdz/Data/ thats where BLP lives and
C:/EC-apps/ISTA/Psdz/Data_swi/ thats where SDP lives.
Psdz=BLP/SDP files. Psdz lite=BLP Psdz full=SDP, just some acronyms.
(03-19-2023, 11:07 AM)Andreas339 Wrote: Hello my friend @ir655,
I finally managed to install ISTA.
ISTA also start.
I only have one problem, I can't connect to any vehicle, whether it's an E or F series. When I click connect I get a "Please wait" screen
See image
After that, the picture disappears and nothing happens.
I installed ISTA with the autoinstaller.
Did I do something wrong?
With INPA and Tool32 I can access the vehicle and read it out
- First off, in ISTA settings tab make sure you select BMW/Mini/BMW i under "Select Brand".
- Under the Vehicle Interface tab in settings make sure you have selected under "Interface type": Dealer organisation ICOM/ENET local area network.
- Make sure firewall and internet is OFF.
- In windows device manager, make sure your COM port settings are set to lowest latency (1) scale is from 1-14.
Try this and report back.