Ok, I reinstalled all from scratch ( Windows 11 & Ista ) ... for Ista only those files was installed : SQLiteDBs GLOBAL & en-GB, and BLP as per readme_standalone.txt ... of course that I used "ista_standalone_installer_4.39.20.exe" !
All seems to working well apart "Set up connection" after the VIN was identified from my car ! does anyone know what it could be ?
So, I used Win 11, ISTA files from the OP, and ENET cable ....
I leave here some screenshots, in the last picture, when I click on "Set up connection" it goes back to the menu in the second picture, there is no error here... for switch ignition on I pressed quicly 3 times on power on button - equivalent to the diagnosis mode.
EDIT :
FIXED !
All seems to working well apart "Set up connection" after the VIN was identified from my car ! does anyone know what it could be ?
So, I used Win 11, ISTA files from the OP, and ENET cable ....
I leave here some screenshots, in the last picture, when I click on "Set up connection" it goes back to the menu in the second picture, there is no error here... for switch ignition on I pressed quicly 3 times on power on button - equivalent to the diagnosis mode.
EDIT :
FIXED !