G20 03/23 - AS/S memory function not working

[jeremyp5287]

Hey all, wasn’t sure if anyone had some ideas. I have a 2022 G20 330ix and one of the first things I coded was the AS/S memory, originally with BimmerCode, and most recently with BU/esys. However with the most recent software update, 03/23, I’ve lost the ability to make any noticeable difference whether I code it on or off. It always appears to be with no memory. Switched it from 01 back to 00, and back again. No luck. Here’s where I make the adjustment:


DME_BAC2
- CAFD_00002742
- TCM_MSA_MEMORY - Werte = 01

Anyone have this same issue, or any suggestions?

[jeremyp5287]

bump. also tried disabling MSA completely versus just memory, no effect.