E92 LCI headlights in Pre-LCI

[lockstock]

My car is a 2008 335D and I'm currently swapping 2011 xenon lights in while using the original FMR2 module.

Lights were pretty much plug and play and work for the most part but there are a couple of issues and was wondering if anybody else here has carried out a similar swap?

Problem 1) is a dash error (A8C5) tagfahrlicht links defektive. 

Tried disabling everything to do with drl and tagfahrlicht in Bimmercode as I don't use DRL's but can't seem to get rid of the error.

Problem 2) Angel eyes flicker like crazy when the engine is running.

Turning the brightness up to HIGH in Bimmercode seems to fix this while the engine is off but still flickers after a few seconds when running.

There was also an issue with the LED front indicators cycling too quickly but changing PWM_BLK_v to mode 03 fixed this.

Thanks in advance

[Memedalji_]

hello

Did you disable cold and warm monitorings for led ?

[lockstock]

hello

Did you disable cold and warm monitorings for led ?

Hey. Yes, these were already disabled by default when I checked using bimmercode.

[Memedalji_]

hello

Did you disable cold and warm monitorings for led ?

Hey. Yes, these were already disabled by default when I checked using bimmercode.

Check them with ncs expert if all of them necessary are coded out otherwise reset frm counter for front daylight