ISTA Standalone / SQLiteDBs / SDP / BLP - latest [TORRENT] with installer EASY

[jhonn]

Google Drive LINK HINZUGEFÜGT

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

Danke

---

Google Drive LINK HINZUGEFÜGT

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

Danke

Super

[abes777]

Can you share 4,42 lite?

[ohmycars]

hi
does anyone know where does this error message comes from and why?

the vehicle identification number (vin) entered is not valid and/or not assigned
re-enter the vehicle identification number(vin) of the vehicle

everything was working fine, i was able to enter the model type codes and even based on features, but then it suddenly just stopped working and gives me this error (after flashing the actual car data page for 50milliseconds or smth)

i even tried to reinstall the whole thing with a standalone installer(1st install was just copy-paste), but i still keep getting the same exact error now, even when addind newer Lite diag files to the data folder?
so could there be some special registry entries still present somewhere or the data files are too new for older program or smth? (it should be the latest 4.39.20 version that i got from somewhere...)
(i deleted all of the registry entries manually from those 2 places/trees and then even tried to use somekind of Rcleaner4,4 to fix it, but even that left too much main entries to the 2 trees)

P.S. the Blp file should be the same exact thing that is the Lite coding files, because i am probably using those to install it as a Lite version? and this probably doesnt have to be the same version as the sqlitedb files?

[skudo]

thanks for the download

thanks for the download

Thanks dowloading ..

[Bmwf20971]

Merci à @"Sedoy » pour ce package incroyable!
Ce fil est pour les versions autonomes, toujours les plus récentes.



Veuillez télécharger 4.32.1x et non le 4.32.2x ou plus récent car la licence est personnalisée et liée au matériel du PC.
Si vous ne savez pas comment installer ISTA manuellement, utilisez mon programme d’installation!!

S’il vous plaît, ne me demandez pas d’autres langues!!




ISTA Standalone

* Rejeter les faux FSC peut être désactivé dans ISTAGUI.exe.config, la valeur par défaut est active.
* la résolution peut être modifiée dans la désactivation ISTAGUI.exe.config* CheckSystemRequirements est maintenant possible dans ISTAGUI.exe.config* activer la programmation avec ENET est maintenant possible dans ISTAGUI.exe.config

(à vos risques et périls.)
* activer le diagnostic pour J29 (Toyota Supra) est maintenant possible dans ISTAGUI.exe.config.
* Le message « Tension de borne inconnue! » avec ENET est corrigé, maintenant ISTA vérifie vraiment la tension, mais ne l’affiche pas.
* ne me demandez pas de supprimer « Tension de la batterie (borne 30) en dessous de la valeur seuil... » message, c’est un message important!!
* lire les données FASTA du véhicule est désactivé dans ISTAGUI.exe.config
* si vous utilisez mes fichiers Regfiles, ouvrez-le avec le Bloc-notes et changez l’InstallLocation au bon emplacement sur son PC. (pas nécessaire avec le programme d’installation)

- pour Diagnose uniquement, les SQLiteDBs GLOBAL(obligatoire), en-GB(obligatoire), de-DE(facultatif) et BLP (obligatoire) nécessaires dans la même version que App (exemple 4.30.4x).
- pour la programmation est SDP nécessaire, en utilisant les anciennes versions autorisées.

Le programme d’installation a besoin de cette structure (voir pièce jointe):
Downloaddirectory
| ista_standalone_installer_x.exe
| ISTA_vx.7z (obligatoire)
| BLP_x.7z (obligatoire)
| SDP_x.7z (si nécessaire)
| ExecutionBreak_x.7z (facultatif et s’il existe)
| configuration.ini (besoin de comparer les fichiers avec le hachage MD5)
|
\---SQLiteDBs
EN_x.7z (obligatoire) DE_x.7z (si nécessaire) ZH_x.7z (si nécessaire et si disponible)


GLOBAL_x.7z (obligatoire)

Autonome: ISTA / SQLiteDBs (OTHER,en-GB,de-DE,zh-CN,it-IT)
Standalone Installer (all above files/dirs must be present in the same directory):  
PSdZData Lite:


Standard Tools Installer v2.12.2 (Ediabas, INPA, NCS Expertentool etc. ECU et SGDAT mis à jour avec v68.0)
SP-Daten v68.0.800

Merci

[fayko1215]

[LastEmprah]

Thank you kindly!

[elmartin7]

Thanks to @Sedoy  for this amazing package!
This Thread is for the Standalone Releases, always latest.



Please download 4.32.1x and not the 4.32.2x or newer as the license is personalized and bind to the hardware of PC.
If you have no idea how to install ISTA manually, use my installer!!!

Please don't ask me for another Languages!!!




ISTA Standalone

* Reject fake FSC's can be disabled in ISTAGUI.exe.config, default is active.
* resolution can be changed in the ISTAGUI.exe.config
* disable CheckSystemRequirements is now possible in ISTAGUI.exe.config
* enable programming with ENET is now possible in ISTAGUI.exe.config (at your own risk.)
* enable Diagnose for J29 (Toyota Supra) is now possible in ISTAGUI.exe.config.
* "Unknown terminal voltage!" message with ENET is fixed, now ISTA check really Voltage, but not display it.
* don't ask me to remove "Battery voltage (terminal 30) below threshold value..." message, this is a important message!!!
* read FASTA Data from Vehicle is disabled in ISTAGUI.exe.config
* if you use my Regfiles, open it with Notepad and change the InstallLocation to the right Location on her PC. (not needed with Installer)

- for Diagnose only, neccessary SQLiteDBs GLOBAL(required), en-GB(required), de-DE(optional) and BLP(required) in the same Version as App (example 4.30.4x).
- for Programming is SDP needed, using older Versions allowed.

Installer need this structure (see attachment):
Downloaddirectory
|  ista_standalone_installer_x.exe
|  ISTA_vx.7z (required)
|  BLP_x.7z (required)
|  SDP_x.7z (if needed)
|  ExecutionBreak_x.7z (optional and if exist)
|  setup.ini (need to compare files with MD5 hash)
|
\---SQLiteDBs
        EN_x.7z (required)
        DE_x.7z (if needed)
        ZH_x.7z (if needed and if available)
        GLOBAL_x.7z (required)

Standalone: ISTA  / SQLiteDBs (OTHER,en-GB,de-DE,zh-CN,it-IT) 
Standalone Installer (all above files/dirs must be present in the same directory):  
PSdZData Lite: 


Standard Tools Installer v2.12.2 (Ediabas, INPA, NCS Expertentool etc. ECU and SGDAT updated with v68.0)
SP-Daten v68.0.800

Thank you very much for the work, I have tested with my R1250GSA and with kdcan it works perfect.

However with cable enet still gives me voltage error, do you know what I can do? I have tried without success the NodeEdiabasVoltageControlV3 and I do not know what to do, I have tried several versions, 4.03, 4.05, 4.32, 4. 39 and there is no way, I select cable enet in ediabas konfigurator, the second option of enet and autodetect but I do not detect it, if I select it as enet local network if I detect it ista, but gives me voltage error, I'm doing wrong friends?

[amine1973]

thank you for sharing, i appreciate it.

[TR3S0R]

thanks for sharing