ISTA Standalone / SQLiteDBs / SDP / BLP - latest [TORRENT] with installer EASY

[jzweiwei]

very Thanks XuLeTZ

[Refpuk]

This thread is for my Standalone Releases, always the latest. HUGE THANKS TO SEDOY FROM CT



Please REP & Thank you if this helps you



If you have no idea how to install ISTA manually, use my installer!!!



Please don't ask me for another language!!!






ISTA Standalone

* resolution can be changed in the ISTAGUI.exe.config
* disable CheckSystemRequirements is now possible in ISTAGUI.exe.config
* enable programming with ENET is now possible in ISTAGUI.exe.config (at your own risk.)
* enable Diagnose for J29 (Toyota Supra) is now possible in ISTAGUI.exe.config.
* "Unknown terminal voltage!" message with ENET is fixed, now ISTA check really Voltage, but not display it.
* don't ask me to remove "Unknown terminal voltage!" message, this is a important message!!!
* read FASTA Data from Vehicle is disabled in ISTAGUI.exe.config
* if you use my Regfiles, open it with Notepad and change the InstallLocation to the right Location on her PC. (not needed with Installer)

- for Diagnose only, neccessary SQLiteDBs GLOBAL(required), en-GB(required), de-DE(optional) and BLP(required) in the same Version as App (example 4.25.1x).
- for Programming is SDP needed, using older Versions allowed.

Installer need this structure (see attachment):
Downloaddirectory
|  ista_standalone_installer_4.27.22.exe
|  ISTA_v4.27.22.22497.7z (required)
|  BLP_4.27.20.7z (required)
|  SDP_4.27.20.7z (if needed)
|
\---SQLiteDBs
        EN_4.27.20.7z (required)
        DE_4.27.20.7z (if needed)
        ZH_4.27.20.7z (if needed and if available)
        GLOBAL_4.27.20.7z (required)

Standalone: ISTA 4.27.22.22497 / SQLiteDBs (OTHER,en-GB,de-DE,zh-CN,it-IT) 4.27.20 / BLP 4.27.20 / SDP 4.27.20
Standalone Installer (all above files/dirs must be present in the same directory):  v4.27.22



Standard Tools Installer (Ediabas, INPA, NCS Expertentool etc. ECU and SGDAT updated with v66.2)


Tip: to download from Mega use MegaSync with Free/Pro Mega-Account, or jDownloader. MegaSync with free-account will continue after a break, be patient.

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

[tintoverano]

hi @XuLeTZ

I couldn't switch the UI to German after full install

sw was not installed on a German OS though

is there anything else to do?

thanks a lot

Did you download the SQLiteDBs named DE_4.27.20.7z and it was checked when you installed it. 
you have 5 languages in SQLiteDBs: DE, EN, GLOBAL (is a must), IT and ZH

yes, downloaded and installed the full package

thanks

[shlinhank]

Thank you and love you!

[masa52]

thank you very much for your input

[NikoLT]

This thread is for my Standalone Releases, always the latest. HUGE THANKS TO SEDOY FROM CT



Please REP & Thank you if this helps you



If you have no idea how to install ISTA manually, use my installer!!!



Please don't ask me for another language!!!






ISTA Standalone

* resolution can be changed in the ISTAGUI.exe.config
* disable CheckSystemRequirements is now possible in ISTAGUI.exe.config
* enable programming with ENET is now possible in ISTAGUI.exe.config (at your own risk.)
* enable Diagnose for J29 (Toyota Supra) is now possible in ISTAGUI.exe.config.
* "Unknown terminal voltage!" message with ENET is fixed, now ISTA check really Voltage, but not display it.
* don't ask me to remove "Unknown terminal voltage!" message, this is a important message!!!
* read FASTA Data from Vehicle is disabled in ISTAGUI.exe.config
* if you use my Regfiles, open it with Notepad and change the InstallLocation to the right Location on her PC. (not needed with Installer)

- for Diagnose only, neccessary SQLiteDBs GLOBAL(required), en-GB(required), de-DE(optional) and BLP(required) in the same Version as App (example 4.25.1x).
- for Programming is SDP needed, using older Versions allowed.

Installer need this structure (see attachment):
Downloaddirectory
|  ista_standalone_installer_4.27.22.exe
|  ISTA_v4.27.22.22497.7z (required)
|  BLP_4.27.20.7z (required)
|  SDP_4.27.20.7z (if needed)
|
\---SQLiteDBs
        EN_4.27.20.7z (required)
        DE_4.27.20.7z (if needed)
        ZH_4.27.20.7z (if needed and if available)
        GLOBAL_4.27.20.7z (required)

Standalone: ISTA 4.27.22.22497 / SQLiteDBs (OTHER,en-GB,de-DE,zh-CN,it-IT) 4.27.20 / BLP 4.27.20 / SDP 4.27.20
Standalone Installer (all above files/dirs must be present in the same directory):  v4.27.22



Standard Tools Installer (Ediabas, INPA, NCS Expertentool etc. ECU and SGDAT updated with v66.2)


Tip: to download from Mega use MegaSync with Free/Pro Mega-Account, or jDownloader. MegaSync with free-account will continue after a break, be patient.

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

[Abel]

This thread is for my Standalone Releases, always the latest. HUGE THANKS TO SEDOY FROM CT



Please REP & Thank you if this helps you



If you have no idea how to install ISTA manually, use my installer!!!



Please don't ask me for another language!!!






ISTA Standalone

* resolution can be changed in the ISTAGUI.exe.config
* disable CheckSystemRequirements is now possible in ISTAGUI.exe.config
* enable programming with ENET is now possible in ISTAGUI.exe.config (at your own risk.)
* enable Diagnose for J29 (Toyota Supra) is now possible in ISTAGUI.exe.config.
* "Unknown terminal voltage!" message with ENET is fixed, now ISTA check really Voltage, but not display it.
* don't ask me to remove "Unknown terminal voltage!" message, this is a important message!!!
* read FASTA Data from Vehicle is disabled in ISTAGUI.exe.config
* if you use my Regfiles, open it with Notepad and change the InstallLocation to the right Location on her PC. (not needed with Installer)

- for Diagnose only, neccessary SQLiteDBs GLOBAL(required), en-GB(required), de-DE(optional) and BLP(required) in the same Version as App (example 4.25.1x).
- for Programming is SDP needed, using older Versions allowed.

Installer need this structure (see attachment):
Downloaddirectory
|  ista_standalone_installer_4.27.22.exe
|  ISTA_v4.27.22.22497.7z (required)
|  BLP_4.27.20.7z (required)
|  SDP_4.27.20.7z (if needed)
|
\---SQLiteDBs
        EN_4.27.20.7z (required)
        DE_4.27.20.7z (if needed)
        ZH_4.27.20.7z (if needed and if available)
        GLOBAL_4.27.20.7z (required)

Standalone: ISTA 4.27.22.22497 / SQLiteDBs (OTHER,en-GB,de-DE,zh-CN,it-IT) 4.27.20 / BLP 4.27.20 / SDP 4.27.20
Standalone Installer (all above files/dirs must be present in the same directory):  v4.27.22



Standard Tools Installer (Ediabas, INPA, NCS Expertentool etc. ECU and SGDAT updated with v66.2)


Tip: to download from Mega use MegaSync with Free/Pro Mega-Account, or jDownloader. MegaSync with free-account will continue after a break, be patient.

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

---

thank you for this

[agkadir]

Thank you my friend

[kioji41]

Thank you very much

[chang2]

hello,

Thank you very much.

thx