ISTA Standalone / SQLiteDBs / SDP / BLP - latest [TORRENT] with installer EASY

[acosuper]

Thank you very much

[Adam_Mag]

Thanks for this software.

[david0101]

This Thread is for my Standalone Releases, always latest.



If you have no idea how to install ISTA manually, use my installer!!!

Please don't ask me for another Languages!!!




ISTA Standalone

* Reject fake FSC's can be disabled in ISTAGUI.exe.config, default is active.
* resolution can be changed in the ISTAGUI.exe.config
* disable CheckSystemRequirements is now possible in ISTAGUI.exe.config
* enable programming with ENET is now possible in ISTAGUI.exe.config (at your own risk.)
* enable Diagnose for J29 (Toyota Supra) is now possible in ISTAGUI.exe.config.
* "Unknown terminal voltage!" message with ENET is fixed, now ISTA check really Voltage, but not display it.
* don't ask me to remove "Battery voltage (terminal 30) below threshold value..." message, this is a important message!!!
* read FASTA Data from Vehicle is disabled in ISTAGUI.exe.config
* if you use my Regfiles, open it with Notepad and change the InstallLocation to the right Location on her PC. (not needed with Installer)

- for Diagnose only, neccessary SQLiteDBs GLOBAL(required), en-GB(required), de-DE(optional) and BLP(required) in the same Version as App (example 4.30.4x).
- for Programming is SDP needed, using older Versions allowed.

Installer need this structure (see attachment):
Downloaddirectory
|  ista_standalone_installer_4.30.43.exe
|  ISTA_v4.30.43.23915.7z (required)
|  BLP_4.30.41.7z (required)
|  SDP_4.30.41.7z (if needed)
|  ExecutionBreak_4.30.41.7z (optional and if exist)
|  setup.ini (need to compare files with MD5 hash)
|
\---SQLiteDBs
        EN_4.30.40.7z (required)
        DE_4.30.40.7z (if needed)
        ZH_4.30.40.7z (if needed and if available)
        GLOBAL_4.30.40.7z (required)

Standalone: ISTA 4.30.43.23915 / SQLiteDBs (OTHER,en-GB,de-DE,zh-CN,it-IT) 4.30.40 / BLP 4.30.41 / SDP 4.30.41
Standalone Installer (all above files/dirs must be present in the same directory):  v4.30.43
PSdZData Lite: v4.30.41


Standard Tools Installer v2.12.1 (Ediabas, INPA, NCS Expertentool etc. ECU and SGDAT updated with v68.0)
SP-Daten v68.0.800

[Sirus_the_virus]

Thank you for the info

[tringuyen7757]

Thank you so much!!

[Miguel Bollozos]

This Thread is for my Standalone Releases, always latest.



If you have no idea how to install ISTA manually, use my installer!!!

Please don't ask me for another Languages!!!




ISTA Standalone

* Reject fake FSC's can be disabled in ISTAGUI.exe.config, default is active.
* resolution can be changed in the ISTAGUI.exe.config
* disable CheckSystemRequirements is now possible in ISTAGUI.exe.config
* enable programming with ENET is now possible in ISTAGUI.exe.config (at your own risk.)
* enable Diagnose for J29 (Toyota Supra) is now possible in ISTAGUI.exe.config.
* "Unknown terminal voltage!" message with ENET is fixed, now ISTA check really Voltage, but not display it.
* don't ask me to remove "Battery voltage (terminal 30) below threshold value..." message, this is a important message!!!
* read FASTA Data from Vehicle is disabled in ISTAGUI.exe.config
* if you use my Regfiles, open it with Notepad and change the InstallLocation to the right Location on her PC. (not needed with Installer)

- for Diagnose only, neccessary SQLiteDBs GLOBAL(required), en-GB(required), de-DE(optional) and BLP(required) in the same Version as App (example 4.30.4x).
- for Programming is SDP needed, using older Versions allowed.

Installer need this structure (see attachment):
Downloaddirectory
|  ista_standalone_installer_4.30.43.exe
|  ISTA_v4.30.43.23915.7z (required)
|  BLP_4.30.41.7z (required)
|  SDP_4.30.41.7z (if needed)
|  ExecutionBreak_4.30.41.7z (optional and if exist)
|  setup.ini (need to compare files with MD5 hash)
|
\---SQLiteDBs
        EN_4.30.40.7z (required)
        DE_4.30.40.7z (if needed)
        ZH_4.30.40.7z (if needed and if available)
        GLOBAL_4.30.40.7z (required)

Standalone: ISTA 4.30.43.23915 / SQLiteDBs (OTHER,en-GB,de-DE,zh-CN,it-IT) 4.30.40 / BLP 4.30.41 / SDP 4.30.41
Standalone Installer (all above files/dirs must be present in the same directory):  v4.30.43
PSdZData Lite: v4.30.41


Standard Tools Installer v2.12.1 (Ediabas, INPA, NCS Expertentool etc. ECU and SGDAT updated with v68.0)
SP-Daten v68.0.800

Hi I am new here.

I noticed that there is no "|  BLP_4.30.41.7z "  file in the folder 

Hope you can help.
Best regards
Miguel

[XuLeTZ]

This Thread is for my Standalone Releases, always latest.



If you have no idea how to install ISTA manually, use my installer!!!

Please don't ask me for another Languages!!!




ISTA Standalone

* Reject fake FSC's can be disabled in ISTAGUI.exe.config, default is active.
* resolution can be changed in the ISTAGUI.exe.config
* disable CheckSystemRequirements is now possible in ISTAGUI.exe.config
* enable programming with ENET is now possible in ISTAGUI.exe.config (at your own risk.)
* enable Diagnose for J29 (Toyota Supra) is now possible in ISTAGUI.exe.config.
* "Unknown terminal voltage!" message with ENET is fixed, now ISTA check really Voltage, but not display it.
* don't ask me to remove "Battery voltage (terminal 30) below threshold value..." message, this is a important message!!!
* read FASTA Data from Vehicle is disabled in ISTAGUI.exe.config
* if you use my Regfiles, open it with Notepad and change the InstallLocation to the right Location on her PC. (not needed with Installer)

- for Diagnose only, neccessary SQLiteDBs GLOBAL(required), en-GB(required), de-DE(optional) and BLP(required) in the same Version as App (example 4.30.4x).
- for Programming is SDP needed, using older Versions allowed.

Installer need this structure (see attachment):
Downloaddirectory
|  ista_standalone_installer_4.30.43.exe
|  ISTA_v4.30.43.23915.7z (required)
|  BLP_4.30.41.7z (required)
|  SDP_4.30.41.7z (if needed)
|  ExecutionBreak_4.30.41.7z (optional and if exist)
|  setup.ini (need to compare files with MD5 hash)
|
\---SQLiteDBs
        EN_4.30.40.7z (required)
        DE_4.30.40.7z (if needed)
        ZH_4.30.40.7z (if needed and if available)
        GLOBAL_4.30.40.7z (required)

Standalone: ISTA 4.30.43.23915 / SQLiteDBs (OTHER,en-GB,de-DE,zh-CN,it-IT) 4.30.40 / BLP 4.30.41 / SDP 4.30.41
Standalone Installer (all above files/dirs must be present in the same directory):  v4.30.43
PSdZData Lite: v4.30.41


Standard Tools Installer v2.12.1 (Ediabas, INPA, NCS Expertentool etc. ECU and SGDAT updated with v68.0)
SP-Daten v68.0.800

Hi I am new here.

I noticed that there is no "|  BLP_4.30.41.7z "  file in the folder 

Hope you can help.
Best regards
Miguel

That`s because ISTA is now updating. Is all up now with the latest 4.31.x files, missing only the SDP because is still updating. You can use the torrent files as they are complete and faster

[andytdaniel]

Thanks XuLeTZ!  Do you have an ETA on the torrent for 4.31.x?

[XuLeTZ]

Thanks XuLeTZ!  Do you have an ETA on the torrent for 4.31.x?

It will be by tomorrow.

[sg076]

Thanks for the Google Drive link.