ISTA Standalone / SQLiteDBs / SDP / BLP - latest [TORRENT] with installer EASY

[Zombiedad]

Cheers  @XuLeTZ  and thanks to Sedoy

Thanks

[Zombiedad]

Cheers  @XuLeTZ  and thanks to Sedoy

Thanks for the link.  I downloaded it and installed it fine.   When I run the program,  the software update tab is grayed out.  How do I enable it ?
I wanna update my car modules.

[genewain]

thanks a million

[marcinpb]

thanks a lot

[WasK]

Cheers  @XuLeTZ  and thanks to Sedoy

Thanks

The installer seems to skip extracting the SDP so you will need to extract that manually and copy it into the pszdata folder

[tintoverano]

Cheers  @XuLeTZ  and thanks to Sedoy

Thanks

The installer seems to skip extracting the SDP so you will need to extract that manually and copy it into the pszdata folder

yep correct!

---

hi @XuLeTZ,

thanks for your efforts!! appreciated

besides SDP install skipping (it can be rectified by manual extraction), connection via ICOM APIPA (LAN cable) protocol is not possible anymore - my last version from you was 4.28.x, where all protocols worked fine

ICOM shows up in the connection dialog, but Connect stays greyed out
ideas?

cheers,

tinto

---

Where is the SDP for 4.31.2x?

in the torrent feed

[FrankDrogotto]

Thanks to Sedoy from CT 
Thanks for uploading this. Very helpful !

This Thread is for my Standalone Releases, always latest.

If you have no idea how to install ISTA manually, use my installer!!!

Please don't ask me for another Languages!!!

ISTA Standalone

* resolution can be changed in the ISTAGUI.exe.config
* disable CheckSystemRequirements is now possible in ISTAGUI.exe.config
* enable programming with ENET is now possible in ISTAGUI.exe.config (at your own risk.)
* enable Diagnose for J29 (Toyota Supra) is now possible in ISTAGUI.exe.config.
* "Unknown terminal voltage!" message with ENET is fixed, now ISTA check really Voltage, but not display it.
* don't ask me to remove "Unknown terminal voltage!" message, this is a important message!!!
* read FASTA Data from Vehicle is disabled in ISTAGUI.exe.config
* if you use my Regfiles, open it with Notepad and change the InstallLocation to the right Location on her PC. (not needed with Installer)

- for Diagnose only, neccessary SQLiteDBs GLOBAL(required), en-GB(required), de-DE(optional) and BLP(required) in the same Version as App (example 4.25.1x).
- for Programming is SDP needed, using older Versions allowed.

Installer need this structure (see attachment):
Downloaddirectory
|  ista_standalone_installer_4.25.13.exe
|  ISTA_v4.25.13.21836.7z (required)
|  BLP_4.25.12.7z (required)
|  SDP_4.25.12.7z (if needed)
|
\---SQLiteDBs
        EN_4.25.12.7z (required)
        DE_4.25.12.7z (if needed)
        ZH_4.25.12.7z (if needed and if available)
        GLOBAL_4.25.12.7z (required)

Standalone: ISTA 4.25.13.21836 / SQLiteDBs (OTHER,en-GB,de-DE,zh-CN,it-IT) 4.25.12 / BLP 4.25.12 / SDP 4.25.12
Standalone Installer (all above files/dirs must be present in the same directory):  v4.24.13
PSdZData Lite: v4.25.12


Standard Tools Installer (Ediabas, INPA, NCS Expertentool etc. ECU and SGDAT updated with v66.2)
SP-Daten v67.1.006


Tip: to download from Mega use MegaSync with Free/Pro Mega-Account, or jDownloader. MegaSync with free-account will continue after a break, be patient.

Google Drive LINK ADDED

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

---

Thanks to Sedoy from CT 

This Thread is for my Standalone Releases, always latest.

If you have no idea how to install ISTA manually, use my installer!!!

Please don't ask me for another Languages!!!

ISTA Standalone

* resolution can be changed in the ISTAGUI.exe.config
* disable CheckSystemRequirements is now possible in ISTAGUI.exe.config
* enable programming with ENET is now possible in ISTAGUI.exe.config (at your own risk.)
* enable Diagnose for J29 (Toyota Supra) is now possible in ISTAGUI.exe.config.
* "Unknown terminal voltage!" message with ENET is fixed, now ISTA check really Voltage, but not display it.
* don't ask me to remove "Unknown terminal voltage!" message, this is a important message!!!
* read FASTA Data from Vehicle is disabled in ISTAGUI.exe.config
* if you use my Regfiles, open it with Notepad and change the InstallLocation to the right Location on her PC. (not needed with Installer)

- for Diagnose only, neccessary SQLiteDBs GLOBAL(required), en-GB(required), de-DE(optional) and BLP(required) in the same Version as App (example 4.25.1x).
- for Programming is SDP needed, using older Versions allowed.

Installer need this structure (see attachment):
Downloaddirectory
|  ista_standalone_installer_4.25.13.exe
|  ISTA_v4.25.13.21836.7z (required)
|  BLP_4.25.12.7z (required)
|  SDP_4.25.12.7z (if needed)
|
\---SQLiteDBs
        EN_4.25.12.7z (required)
        DE_4.25.12.7z (if needed)
        ZH_4.25.12.7z (if needed and if available)
        GLOBAL_4.25.12.7z (required)

Standalone: ISTA 4.25.13.21836 / SQLiteDBs (OTHER,en-GB,de-DE,zh-CN,it-IT) 4.25.12 / BLP 4.25.12 / SDP 4.25.12
Standalone Installer (all above files/dirs must be present in the same directory):  v4.24.13
PSdZData Lite: v4.25.12


Standard Tools Installer (Ediabas, INPA, NCS Expertentool etc. ECU and SGDAT updated with v66.2)
SP-Daten v67.1.006


Tip: to download from Mega use MegaSync with Free/Pro Mega-Account, or jDownloader. MegaSync with free-account will continue after a break, be patient.

Google Drive LINK ADDED

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

[VaporWarrior]

Thanks for the share.

[tintoverano]

the ICOM APAPI connection issue is only happening when "local network" is selected - using fix IP ("direct connection") works fine

I guess it has something to do with how DHCP is handled in v4.31.20 as for v4.28.x using "local network" was OK, at least for me

[SMAN]

Thank you very much!