10-01-2020, 12:12 AM
(09-29-2020, 11:51 AM)Ducatiman Wrote: I use usb to obd II. Unfortunately, the labtob has no ethernet connection. However, as already described, I got the connection established with an older version of ista with the configuration on the F3X series.
If you use an USB to OBD cable then ISTAD relies on your EDIABAS configuration. As above you need to click on the WRENCH in ISTAD and select use EDIABAS.ini
Also check that EDIABAS.ini is set to OBD. So if it works with INPA which uses EDIABASÂ then connection should also work in ISTAD.