6WB Cluster

[smercki]

Hello mate. I installed a use 6WB in my F10. Whilst the install wasn’t difficult it was a bit fiddly at times. Main issues being VINs, and removing them. The VIN is stored in 2 eeproms and the issue was finding a tool to erase the 95320 EEPROM. My R270 handled the 160D0WT perfectly on the board and on flashing the KOMBI and VO coding it the EEPROMS should have taken my VINs but this was not the case. I ended up having to buy a carprog programmer to erase the VIN in the 95320 and write my own. Once this was done the cluster worked perfectly.

Hi
I reset using r270 and retrofitted more than 30 6wb for f10 / 15 and I only reset the 160D0WT eeprom, nothing ever done on 95320 and everything always works perfectly and without dot red