Hi all,
My passenger (UK) seat massage module stopped working so brought a used one from USA. Plugged it in but think it needs coding as pressing the button on the door to activate shows no lights but it does start to work. Interestingly when pressing the button on the passenger side the driver side lights up, not sure if it thinks its in a lhd car instead of a rhd car.
I connected car to ISTA and in the control tree view its showing a the SPNMVL (seat massage) module is not responding as well as the EPS and SAS for some reason. When I ran this a week ago it was on the SPNMVL one not responding so not sure what has happened to the other two.
Anyone got any ideas on how I can code this. Doing a software update with ISTA is showing the 3 modules need repalcing.
Thanks in advance
My passenger (UK) seat massage module stopped working so brought a used one from USA. Plugged it in but think it needs coding as pressing the button on the door to activate shows no lights but it does start to work. Interestingly when pressing the button on the passenger side the driver side lights up, not sure if it thinks its in a lhd car instead of a rhd car.
I connected car to ISTA and in the control tree view its showing a the SPNMVL (seat massage) module is not responding as well as the EPS and SAS for some reason. When I ran this a week ago it was on the SPNMVL one not responding so not sure what has happened to the other two.
Anyone got any ideas on how I can code this. Doing a software update with ISTA is showing the 3 modules need repalcing.
Thanks in advance
![[-]](https://www.bimmerscene.com/images/collapse.png)