Hello everyone
I'm new here and thought I'd share a problem I have and maybe someone has experience with this.
I recently got my chain changed and I've been driving with it for 2 months now. No weird noises, nothing.
Engine runs smoothly, no issues whatsoever.
Only issue is that I'm getting a fault code (273D00 and 2F2A00). Crankshaft and Camshaft are too far apart or something. The garage said they did the replacement perfectly so there shouldn't be an issue. How do I check the degrees it's on? I've done the increment wheel reset and teach-in for camshaft and crankshaft with ISTA+ because they didn't do it themselves. The procedures I did were completed with no issues. Replaced the camshaft and crankshaft sensors as well.
Issue still keeps coming back.
Anyone else encountered this issue?
I'm new here and thought I'd share a problem I have and maybe someone has experience with this.
I recently got my chain changed and I've been driving with it for 2 months now. No weird noises, nothing.
Engine runs smoothly, no issues whatsoever.
Only issue is that I'm getting a fault code (273D00 and 2F2A00). Crankshaft and Camshaft are too far apart or something. The garage said they did the replacement perfectly so there shouldn't be an issue. How do I check the degrees it's on? I've done the increment wheel reset and teach-in for camshaft and crankshaft with ISTA+ because they didn't do it themselves. The procedures I did were completed with no issues. Replaced the camshaft and crankshaft sensors as well.
Issue still keeps coming back.
Anyone else encountered this issue?
![[-]](https://www.bimmerscene.com/images/collapse.png)
![[Image: image.png]](https://static.wixstatic.com/media/eaba4e_4161f6a5d1eb444c976c438b7565cf87~mv2.png/v1/fill/w_122,h_84,al_c,usm_0.66_1.00_0.01,enc_auto/image.png)
