12-13-2021, 06:55 PM
Hey guys,
I had to set up my laptop once again due to a harddisk failure, got a bigger one instead and set it all up like i did last time. First of all, I can tell you that E-Sys, INPA, ISTA+ are working, both on E-series and F-series cars.
But what doens't work at all is the service manager....in the past, i was thinking i messed sth up while installing it, but this time, i tried to install it exactly as recommended...but still issues
I also copied the prg. files from ISTA to the ECU folder of Ediabas (C:/EDIABAS)...
All it says is:
102:SYS-0012: IDENTIFICATION ERROR
What else could i check or what could be wrong? Also Ediabas configurator is set to ENET (ethernet), cable should be good as it works with other applications as said...
Thx,
Alex
I had to set up my laptop once again due to a harddisk failure, got a bigger one instead and set it all up like i did last time. First of all, I can tell you that E-Sys, INPA, ISTA+ are working, both on E-series and F-series cars.
But what doens't work at all is the service manager....in the past, i was thinking i messed sth up while installing it, but this time, i tried to install it exactly as recommended...but still issues
I also copied the prg. files from ISTA to the ECU folder of Ediabas (C:/EDIABAS)...
All it says is:
102:SYS-0012: IDENTIFICATION ERROR
What else could i check or what could be wrong? Also Ediabas configurator is set to ENET (ethernet), cable should be good as it works with other applications as said...
Thx,
Alex
![[-]](https://www.bimmerscene.com/images/collapse.png)