Hi, everybody

I retrofitted on my f31 asd, and hk (AMPT variant with direct support to ASD)

I coded modding my FA to 340i 

HK working perfectly
ASD does not work at all.

ESYS see it, and ista does not report errors.

ANY HINT?

Thank you in advance

Hey,

Do you guys have any idea how to delete the Adaptive M Suspension? I removed 2VF from FO, calculated FP and wrote it. After that i coded ICM, HU_NBT, KOMBI and DSC, but the CC-Warning about the Suspension stays after deleting faults with ISTA.

I read, that on F80/F82 you have to unplug the VCM-Module in the trunk. Is that right? Unplug it before coding or after?

Thanks and happy easter,
Julius

g20 dkombi4 need to disable sos fault

Hi,

I need help/information on how to make NBT EVO from a G30 turn the screen on on bench.
I'm connecting as flow:

A ZGW2-4sk to HU via k-can2 HU connected to CID screen also connected ZBE3 (touch).
I reflashed the ZGW with same vin as HU. ZGW connected to enet cable.

I can see and code HU in esys. I can see and diagnos HU and ZGW in ista. But the screen still black. Can not see the ZBE3 (touch) on esys and It does not light.

I could run the R,G,B test on the screen in ista and the screen works fine. I use an Arduino CAN bus code to wakeup the HU and the ZGW.
Can see on ampere meter when they went wake and sleep. Otherwise I would not be able to communicate with them via esys vs ista.

I tried to connect the


What I am missing here?

These are the commands I used. I tried other commands but same result. the HU and ZGW are wake but screen still black.



Using these two commands every 500 ms.

<
message1.can_id = 0x130; //formatted in HEX

  message1.can_dlc = 5; //formatted in DEC
  message1.data[0] = 0x45;
  message1.data[1] = 0x40;
  message1.data[2] = 0x22; //formatted in HEX
  message1.data[3] = 0x8F;
  message1.data[4] = 0xFE;

  message2.can_id = 0x12F; //formatted in HEX
  message2.can_dlc = 8; //formatted in DEC
  message2.data[0] = 0x37;
  message2.data[1] = 0x7C;
  message2.data[2] = 0x8A;
  message2.data[3] = 0xDD; //formatted in HEX
  message2.data[4] = 0xD4;
  message2.data[5] = 0x05;
  message2.data[6] = 0x33;
  message2.data[7] = 0x06;
>

hello, 

I have a zgw 2 mid and it wants me to flash it to 4sk, for test bench / nbt / evo update, and I want to avoid buying one: D

it's the first procedure of its kind that makes me change software on a zgw and I don't know exactly how to do it.
I think you have to put the data from a zgw 4sk but I'm not sure if this is the solution to what I want to do

G30 not going fater than 80 KM\h any way to remove that and make car run as any normal car?

I get a X3 F25 after a 325XI E90 
I have a GS bike to.
I would be happy to exchange about knowledge mechanic and soft on this forum.

Hello friends!

Does anyone have the newly released BMW Road Map North America EVO 2022-1 to share?

Thanks in advance!

Bueno, mi pregunta es si puedo poner la aplicación bmw de fsc en un entrynav y si hay algún generador de fsc del grupo para obtenerlo fácilmente o tendría que comprar el código.