Hi all
I'm trying to flash my headunit with some changes to the FA that I've made using ė-šÝ§.
However, I'm running into an error about 50% into the flash and it's leaving my headunit showing "No Signal" on the screen.
Below is the error output from ė-šÝ§.
Code:
<[HU_CIC - 63 - swfl_00000c38-008_040_002] Transaction type: swDeploy; Message: 51% progress on ECUId:HU_CIC_0x63 [61% of swfl_00000c38-008_040_002] [TRANSACTION]>
<[HU_CIC - 63] performEcuFlash finished with protocol UDS [PROGRESS]>
<[] job failed with negative response error:
code: repeat job
description: Service TD returned a negative response with response code generalProgrammingFailure; LinkName: HU_CIC_63_ETHERNET
severity: ERROR
[THROWABLE]>
<[HU_CIC - 63 - swfl_00000c38-008_040_002] Transaction type: swDeploy; Message: TA finished [TRANSACTION]>
<[HU_CIC - 63] There was an error during TAL execution, please check the log files. [WARN]>
<[HU_CIC - 63] - [Exception - HU_CIC - 63] job failed with negative response error:
code: repeat job
description: Service TD returned a negative response with response code generalProgrammingFailure; LinkName: HU_CIC_63_ETHERNET
severity: ERROR
>
<[HU_CIC - 63] finalizeECUFlash started [PROGRESS]>
<[HU_CIC - 63] finalizeECUFlash finished [PROGRESS]>
<[] There was an error, please check the log files. [WARN]>
<[] - [Exception - HU_CIC - 63] job failed with negative response error:
code: repeat job
description: Service TD returned a negative response with response code generalProgrammingFailure; LinkName: HU_CIC_63_ETHERNET
severity: ERROR
>
<[] finalizeVehicleFlash started [PROGRESS]>
<[] finalizeVehicleFlash finished [PROGRESS]>
<[] prepareVehicleForCoding started [PROGRESS]>
<[] prepareVehicleForCoding finished [PROGRESS]>
<[] finalizeVehicleCoding started [PROGRESS]>
<[] finalizeVehicleCoding finished [PROGRESS]>
<[] finalizeTALExecution started [PROGRESS]>
<MCDDiagService<id=464637, job=com.bmw.psdz.jobs.common.MCD3_FinalizeTALExecution, service=RC_TAS_ROUTING - Routine Control for TAS, description=error: negative response : NoResponseFromSubnetComponent, link=TAS_F0_ETHERNET> [DIAGSERVICE]>
<MCDDiagService<id=464637, job=com.bmw.psdz.jobs.common.MCD3_FinalizeTALExecution, service=RC_TAS_ROUTING - Routine Control for TAS, description=error: negative response : NoResponseFromSubnetComponent, link=TAS_F0_ETHERNET> [DIAGSERVICE]>
<MCDDiagService<id=464637, job=com.bmw.psdz.jobs.common.MCD3_FinalizeTALExecution, service=RC_TAS_ROUTING - Routine Control for TAS, description=error: negative response : NoResponseFromSubnetComponent, link=TAS_F0_ETHERNET> [DIAGSERVICE]>
<MCDDiagService<id=464637, job=com.bmw.psdz.jobs.common.MCD3_FinalizeTALExecution, service=RC_TAS_ROUTING - Routine Control for TAS, description=error: negative response : NoResponseFromSubnetComponent, link=TAS_F0_ETHERNET> [DIAGSERVICE]>
<MCDDiagService<id=464637, job=com.bmw.psdz.jobs.common.MCD3_FinalizeTALExecution, service=RC_TAS_ROUTING - Routine Control for TAS, description=error: negative response : NoResponseFromSubnetComponent, link=TAS_F0_ETHERNET> [DIAGSERVICE]>
<MCDDiagService<id=464637, job=com.bmw.psdz.jobs.common.MCD3_FinalizeTALExecution, service=RC_TAS_ROUTING - Routine Control for TAS, description=error: negative response : NoResponseFromSubnetComponent, link=TAS_F0_ETHERNET> [DIAGSERVICE]>
<[] finalizeTALExecution finished [PROGRESS]>
<TAL execution finished [TAL_EXECUTION_FINISHED]>
TAL-Execution finished with status: "FinishedWithError".
TAL execution finished. Duration: "3h 26min 7s".
<>
Read SVT after TAL execution started.
Read SVT after TAL execution finished.
I'm not very experienced with any of this, I've simply been trying to follow some tutorials online in order to get AU/NZ Maps on my Japanese import. I've been given the relevant FA codes to add to the HU_CIC which I believe I've done correctly, but keep on running into the error above.
I have tried running this 3 times, starting from scratch each time to make the svt and tal files...
I have attached the log file. Just rename it from .zip to just .log
If anyone can help, or identify what's going wrong and more importantly, what I need to do to fix it, I'd love to hear from you.
Thanks in advance.
I'm trying to use ėšÝ§ 3.30.1 + ė-šÝ§ launcher pro 2.8.1 + PSdZData_Lite_v4.37.42
ėšÝ§ connects just fine, read FA, but once I click "activate FA" the green bar starts scrolling but nothing happens. I'm obliged to CTRL-alt-canc to close the app.
who is willing to change ėšÝ§ ultra i can offer mitchell prodemand and mitchel truck series 2022 online access for 12 months or ford fdrs for 12 months
Good evening,
I'm Daniel, from Spain.
I just bought an used F20 125d, I come from Audi A3 and this is a whole new thing. A never come back think. Really in love with my new car.
For the moment, I will be reading and learning, I will try to upgrade firmwares, coding, and much more by myself (once I learned).
I hope you can help me in the learning process.
Bonjour,je me presente, Ludovic 46 ans de bourgogne centre-est france!
J'ai eu 3 Bmw dans ma vie,
-une E30 325ICAB Phase1 (que je regrette amèrement)
-un 530d E39 berline que j ai quitté a 400 000 km (Mon frère la roule toujours =
-mon AllDay une 530D E39 touring.
Je me suis inscrit car j'ai besoin d'apprendre plus sur la lecture de code et trouver des référentielles.
Apres avoir longtemps fonctionné avec BmWscanner,je veux passer a plus serieux.
J'ai donc trouvé un ÏÑÞÀ 5.0.0 qui est un peu difficile appréhender.(pas facile la langue allemande!!!)
En recherchant une version plus recente je suis tombé sur un 5.0.6 qui m'a amené jusqu’à vous pour pouvoir le déverrouiller!
C est plutôt bien en fait car j'avoue avoir un peu galérer sur mes premiers pas.
Quelqu'un peut til me dire dans quel section du forum dois-je faire une demande pour le mot de passe de decompression du fichier zip?
Cordialement!
boa noite a todos do Brasil para o mundo abraços.
=