Hello everyone,

came across this site and decided to register, seeing as there is a lot of info here.

I myself are a proud owner of a '07 BMW E92 325i since februari last year and a bit of a car nut as well. 

Been doing programming and coding on cars (started with VAG) for some years now and continuing this hobby with BMW. 

So glad to join and speak to you on here!


Greets!

Hello

I am trying to recover a m-ask unit with programming status 9.

Got the car with a programming abort on mostgw. Tried to program with ÎŜ†Ä/p. That failed. Tried winkfp, comfort - that failed. Tried nfs emergency flash - failed.
Winkfp expert mode was able to force a flash, but failed at 100%with security access failed, programming state implausible. 
Mostloop is dead
Pulled the unit open, is it the ST chip flash that's for the mostgw? And does anyone have the dump for this on the m-ask? Could only find for ccc.

Or any ideas on tools/methods that could recover by obd? 

Any suggestions greatly appreciated ?

hey Guys, im new on here, Techncian and MOT tester and BMW lover/owner,  E93 2009 msport 320d auto,  from Leicester UK,  say hello

Hi, ANDY FROM UK

Hi, I'm Eric from Pasadena, US, currently in South Korea.

I have 328i and 740LI and I am so pleased to join here.  

Thanks!

Hi everybody, i have an issue with retrofitting a 6wb on a f26 with HUD
Hud is no working
With old Kombi everything is right

ÎŜ†Ä SAYS : Warping error
Someone has hints, or experience of similar problems?

Ciao, mi chiamo Max e sono nuovo in questa comunità.
Felice possessore di un E36 320i da 15 anni.
A parte la carrozzeria, mi occupo io di tutto il resto, ho una specie di officina con i miei amici bimmers e cerchiamo di fare tutto in casa.

Hi All,

I have retrofitted NBT evo into my f10 and all working great for the most part however i have one issue im trying to figure out

When ever i open a door it shows the wrong door open on the cluster for example if open drivers door (RHD) it shows passenger door open and same again if i open passenger door it shows drivers door open.

my car: 2015 f10
nbt evo unit from g30

Any help or guidance would be greatly appreciated

Hi all,

I have done a change on my headlights from standard led to ICON LEDs and with that, I had to change the SZL so I have the AHB option on the stalk.

Apparently, the cluster that I have ordered is from a vehicle without a heated steering wheel and active protection and mine have it.

So at the moment, the heating of the wheel and the active protection is not working.
I have an error on ÎŜ†Ä SZL wrong version and steering wheel missing LIN slave.

I have tried to VO code the BDC_Body and Kombi with the options that I have in my car with no success.

My question is is it possible to enable the two options (heating and active protection) by updating the cadf file or some other way for the upgraded stalk?

Thank you in advance!

Hi
can anyone help me with FSC repair pack for VIN: 2C69760,  P916610 and 3A69591

thanks