regards for all from Bavaria
 
My car is a BMW X3 F25

Hi,

Does anybody know what was the last version of ÎŜ†Ä-P where you could update only the modules that you choose? At the moment I'm using a dedicated system with 3.56 in this case, but was wondering if there's something newer.

Best regards,
T

Edit: Or is it somehow possible to load newer databases to older version of ÎŜ†Ä-P?

Hi guys, attempting to downgrade ASD module to lower firmware to support engine noise from ASD. 

Loaded up ė-šÝ§ 3.25.3 with 2014 PsdzData. It allows me to connect and calculate SVT/Soll and Tal Calculation but when trying to activate the FA I get the following error 

No FP could be generated from FA "". [C002]
Not all elements of the FA were found in the FA2FP: Zeitkriterium 0716
SALAPA 21C
SALAPA 8R9
[72]



Can anyone shed some light?


Thanks

Hi, I’ve some problem with my client’s car. There is no PT-CAN communication after car wash. I’ve find some bad connections in front of passenger side, and one below rear seat. Resistance between CAN L and CAN HIGH is 60 ohms. Try to change can Gatway Module, and SIM but still same. There is fault pt-can off in zgm

Does anyone knows where to buy does emulators that make the F8x cluster work without any transmission errors when installed in F3x cars?

Hey guys,

Am about to retrofit a 6wa in my 2013 Sport edition F30, I have a basic cluster and I don’t really like the 6WB that’s why I went for the 6wa, and while searching the internet i saw the SLI emulator, now I wanna know how to code it to the car please, I just installed ė-šÝ§ 03.30.1 with luncher Pro 2.8.1.155 but I don’t have activation (PM & Emailed for it without success)

Any help is appreciated
Thank you very much

Hi Guys

My Name ist marc, Im from Belgium.

Im very impressed from this content here, thank you guys for sharing! Very happy

My baby is a F30 320I from 2014.

Good afternoon everyone. 

I have retrofitted 370mm/345mm brakes to my 2013 F30 an I have been told that I need to code them. 

My first question is, is this really necessary? 

My second question is, please could someone guide me through the coding process? 

I would be eternally grateful. 

Thanks in advance 

Steve

Hi guys,

Can I squeeze your brains?
For weeks I'm struggling to make 5AC to work. Car is F31 2012, right hand drive steering wheel (UK)
I have adaptives xenons, but 5AC refuses to work with glarefree while on high beam. Is not avoiding the others in traffic, just turns off entirely.
I have attached my FA, SVT and CAFD files.
Can someone with experience help me out please?

Attached Files

  FA F31.zip (Size: 25.78 KB / Downloads: 3)

It’s a pleasure for me to be here I hope to help people and shared my experiences 
big thanks to Mr ROB for his great job in this forum 
I have 2 cars X5 and F21 I drive only BMW