hello, im owner from bmw e90 325d '10

Hi everyone

Hello and Greetings to everyone! 

I am Iliya from Bulgaria, founder and man in charge with BMW Map&Coding Upgrade! 
I am here to assist whenever possible. We are involved in retrofiting, coding and map updates on place and remotley   


   

Whats going on guys I have two BMW F10's I am working on with both the exact same issue. For some reason the adaptive xenon headlights that we put in wont allow us to use the high beams unless we turn the headlights off then pulling the lever it works just fine but if turn the lights back on and pull the lever nothing. We flashed both vehicles headlight modules with ė-šÝ§ and Initialized the headlights LEDS with ÎŜ†Ä(D) both cars headlights are working perfectly just the High beams will not work. One of the cars we replaced because he wanted to go from halogen to Xenon and VO coded the headlights in with the correct feature. The other vehicle went from Xenon to Xenon but had water damage only on the left and only replaced the left side headlight and module. I only ran into this issue with Adaptive Xenon for some reason. Any thoughts on what else I can do to fix this. not sure if its the vertical aim needs to be adjusted. Please let me know what it can be. One is 2011 CIC and the other is 2015 NBT. Thanks

E SERIES:

rocedure to register new battery using ÏÑÞÀ:

Step 1: select BODY from the left hand pop-up menu
Step 2: select POWER MODULE in the right hand list
Step 3: select ACTIVATE from the next menu
Step 4: Select ACTIVATE2 from the next menu
Step 5: Then select F7 - Register battery replacement. Almost instantly you get the message: "Register battery replacement Activated properly."


F SERIES:

In that case you open up Toolset 32 (under EDIABAS folder):
1. Open MSD80.prg

2. Look up steuern_batterietausch_registri. (near bottom of job list)

3. Go to Jobs menu

4. Select Run Job



(May alternatively be under MSV70 or MSV80.prg)



Also, and this is important: 
THIS IS ONLY FOR REGISTERING AN OEM BATTERY FROM BMW! Alternate replacements will need additional coding to match voltage etc differences

Hello everyone

Hello!

Does anyone knows how to activate welcome lights via fog lights on a X5 F15? Tried cheat sheets but without any results. Have anybody done this before and has a viable solution?

This is for those who do not want to change VO and Code.




In HU:
The following must be Aktiv in 3003_Telefon_Telematik_Online

• CDMM_Bluetooth_Audio
  
• CDMM_BT_DATABASE
  
• BT_MODUL_ON_OFF
  
• A2DP_PROFILE
  
• AUDIO_PLAYER_ON_OFF
  

• A2DP_AVRCP_EIN_AUS
  

My name is bogdan and I own a 2009 335i.

Hello,

BMW X6 40d