Hello everyone, 
Thanks to you and your very usefull posts i managed to install the BMW software kit ( ISTA 4.56.30 with PSDZdata 4.57.30 and all the StandardTools with EDIABAS 7.6.0 ) . I haven't received any errors when installing the kits and the antivirus hasn't reported anything to catch my attention.
The problem is that when i try to connect to my E46 320d and to a friend's E60 525d the software can identify the vehicle with VIN number and everything but when it comes to doing a scan it won't identify any of the ECU's, they show up on the tree list but i can't comunicate with them. I'm trying to use a genuine ICOM Next interface on it, and it detects both permanent 12V and ignition 12V lines . I attached all the info that i think they might give you an idea about the origins of my problem.
Any suggestions are welcomed.
Thank you!

Attached Files

Thumbnail(s)
                       

Hello

I'm new to the forum and looking forward to meeting new people.

I code my F25 and previously E39 and E38 :-)

Unfortunately, there's no longer any software available for reading the Motronic system on the E30.

Best regards
Robert

My language is German.

To keep enjoying your privileges, Please always read the Forum's Updated Rules:CLICK HERE
 

Can somebody help turning CC-ID 71 OFF on this E92, below is the NETTODAT, I tried changing it to: 

B 00300100,0010,61,7F,FF,FF,FF,FF,FF,FF,F7,FF,FF,FF,FF,FF,FF,FF as per below, but it's still shown.

CC_AKTIVIERUNG_2
7F, FF, FF, FF, FF, FF, FF, FF
B0, B1, B2, B3, B4, B5, B6, B7

B 00300000,0010,E7,EF,0A,04,1E,0D,00,32,0A,1E,0A,1E,EB,2A,02,14
B 00300010,0002,FF,0F
B 00300100,0010,61,FF,FF,FF,FF,FF,FF,FF,F7,FF,FF,FF,FF,FF,FF,FF
B 00300110,0010,FF,FF,FF,FF,FF,FF,FF,BF,FF,FF,FF,FF,EF,FF,FF,FF
B 00300120,0010,FF,FF,FF,FF,FF,FF,EF,FF,FF,FF,FF,FB,FF,FF,FF,FF
B 00300130,0010,FF,FF,FF,FF,FF,FF,AF,FF,FF,FF,FF,FF,FF,7E,03,00
B 00300200,0009,00,B2,5E,4D,A1,AA,5F,55,A0
B 00300300,0002,7E,7E
B 00300400,000C,E5,6F,65,EA,20,04,21,00,00,00,00,00
B 00300500,0010,BD,20,40,0A,05,82,03,03,77,00,2C,3A,40,46,00,18
B 00300510,0003,29,31,37
B 00300600,0010,1E,FF,FF,FF,FF,7D,0A,32,02,5F,00,BA,01,72,02,04
B 00300610,000E,03,D4,03,3C,00,13,01,F9,01,E1,02,D4,03,FF
B 00300700,0006,F6,03,03,FF,FF,F6
B 00300800,0010,09,28,40,DC,05,2C,01,3C,00,10,0E,50,46,FF,FF,E0
B 00300810,0004,1E,10,18,57
B 00300900,0010,27,50,0A,41,32,91,30,91,18,82,18,92,01,92,30,3C
B 00300910,0010,83,92,92,91,81,81,91,83,83,32,FF,FF,FF,FF,FF,FF
B 00305000,000B,87,C2,3F,0A,0A,70,F3,78,47,00,C6
B 00310600,0010,DC,FE,00,00,00,00,00,13,0F,00,00,00,00,00,00,00
B 00310610,0010,00,00,00,F0,00,00,00,00,00,40,60,00,00,00,00,00
B 00310620,000D,00,00,00,00,00,01,10,78,C8,B0,FF,FF,FF
B 003B0200,0010,01,04,A0,00,04,00,00,01,A0,00,04,00,00,04,00,00
B 003C0300,0005,0C,18,11,25,20
B 003C0400,0004,84,00,FC,78
B 003C0F00,0004,18,08,10,00

Hi, looking forward to using bimmerscene, current ride F31 330d

Honored to be part of this community, Im new to the brand and new to coding/flashing etc.

Im the proud owner of a 2015 Mineral white BMW M4.

Hello, is there anyway to obtain new 0xBE FSC code for KAFAS2 after accidentaly clicking on update FSC in E-Sys? (finger slipped on touchpad while gliding over buttons)
If yes, then I'm happy to pay

Good afternoon,

ISTA+ cannot find the DME module. Previously it was visible and showed the SAE fault: “Engine has been tuned.” Now it does not detect the DME at all.
It seems this started after I replaced the VTG (transfer case) module and flashed it using E-Sys. I’m not sure if this could be related, but the DME has not been detected since then. Its definitely not ista problem. The car runs perfectly.
Any advice would be appreciated.



   
   

Hello people, thank you for the access. I`m master in coding and programing!
It will be great time for me to be part of this community!