Bimmer Scene - Latest BMW Coding / Retrofits / Maps
ÎŜ†Ä+ programming ENET - Printable Version

+- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com)
+-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1)
+--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3)
+--- Thread: ÎŜ†Ä+ programming ENET (/showthread.php?tid=5805)

ÎŜ†Ä+ programming ENET - elmartin7 - 11-01-2023

Hello, I am trying to update ECU with ÎŜ†Ä+ 4.39.20 and psdzdata 4.44.11 files full, with kdcan cable and voltage emulator I can do things but not update.

ÎŜ†Ä requests ÏçØɱ, is there a way to do it with an enet cable in this version? I can't find a voltage emulator for enet cable either, I don't see any configuration to do it through ediabas like enet remote.

RE: ÎŜ†Ä+ programming ENET - TheNine90 - 11-01-2023

Which car is this? You can update through ENET but need Sedoy version of ÎŜ†Ä

RE: ÎŜ†Ä+ programming ENET - BASHARA - 11-01-2023

Hello,

Where can I purchase ÎŜ†Ä+ for programming?

thanks.

RE: ÎŜ†Ä+ programming ENET - JSC - 11-01-2023

(11-01-2023, 07:02 AM)BASHARA Wrote: Hello,

Where can I purchase ÎŜ†Ä+ for programming?

thanks.
BMW ÎŜ†Ä-D 4.39.20 Standalone Activated - Torrent (bimmerscene.com)

RE: ÎŜ†Ä+ programming ENET - elmartin7 - 11-01-2023

In k001 (k50) is motorbike.

Correct, I use version 4.39.20 sedoy, with kdcan and ediabas I can connect the bike but not update because it tells me that it is not ÏçØɱ, with enet I can't do almost anything, because it doesn't emulate the voltages, enable enet programming framework in ÎŜ†Ä registry, I put ediabas port and configure enet remote, but I don't get the voltages, what can I do?

RE: ÎŜ†Ä+ programming ENET - TheNine90 - 11-01-2023

DCAN cable wont even work. Just use ėšÝ§ and enet cable

RE: ÎŜ†Ä+ programming ENET - elmartin7 - 11-01-2023

(11-01-2023, 04:50 PM)TheNine90 Wrote: DCAN cable wont even work. Just use ėšÝ§ and enet cable


yes, line-d its works with motorcycles, I use it to check and delete errors that occur when doing updates from ėšÝ§, and reset service values, with enet I can't do it if it doesn't emulate voltage, it gives ignition and voltage errors.
My cable kdcan is chip RQ and 4 switch position , In the Spanish forums I shared how to play ÎŜ†Ä with kdcan

RE: ÎŜ†Ä+ programming ENET - elmartin7 - 11-02-2023

[Image: 1697795533178.png]

My problem with cable enet is voltage control, for port ediabas.ini , in port enet no possible,have not values voltage mandatory for ÎŜ†Ä+

RE: ÎŜ†Ä+ programming ENET - TheNine90 - 11-02-2023

DCAN wont work for flashing. Only ENET and ÏçØɱ can flash. For your case use ėšÝ§ and ENET cable to flash the bike.

RE: ÎŜ†Ä+ programming ENET - elmartin7 - 11-02-2023

(11-02-2023, 12:44 PM)TheNine90 Wrote: DCAN wont work for flashing. Only ENET and ÏçØɱ can flash. For your case use ėšÝ§ and ENET cable to flash the bike.


thank you !!


And use ÎŜ†Ä with enet voltage control , is probably?