05-18-2021, 05:58 PM
Wanting to code VLD on my '18 X3 and '16 750 (both have adaptive LED's).
Using Bimmercode, in BDC2, I found the two items that need to be enabled:
3530 LaMaster1 > C AFS ENA
3530 LaMaster1 > LUT FLC FORWARDLIGHTING Y
However, if I use E-sys/CAS 1DF8 module,
3530 LaMaster1 > LUT FLC FORWARDLIGHTING Y is nowhere to be found in either car.
At any rate, enabling both via BC didn't seem to make any changes, i.e., the left beam didn't pan in response to D or R.
Any idea?
Using Bimmercode, in BDC2, I found the two items that need to be enabled:
3530 LaMaster1 > C AFS ENA
3530 LaMaster1 > LUT FLC FORWARDLIGHTING Y
However, if I use E-sys/CAS 1DF8 module,
3530 LaMaster1 > LUT FLC FORWARDLIGHTING Y is nowhere to be found in either car.
At any rate, enabling both via BC didn't seem to make any changes, i.e., the left beam didn't pan in response to D or R.
Any idea?