02-25-2024, 02:46 PM
(This post was last modified: 02-25-2024, 02:49 PM by pan_sattan.)
Hi,
I have F010-11-03-512 I-step
enet cable and e-sys 3.30.1 launcher pro 2.8.1.155
and coding is working let's say disable gong for seat belts, etc.
but for disabling auto start/stop function in CAS unit the car is still acting like before.
from cheatcodes I can see parameter TC_MSA_DEFAULT_OFF set as AKTIV
but in my unit I don't have, or I dont see it...
There is present just something like TC_RESERVED_BYTE3_BIT4
should I firstly update firmware in CAS unit or even whole car to newer I-step? Which one is recommended? Or what should be wrong?
Thanks for any suggestions...
I have F010-11-03-512 I-step
enet cable and e-sys 3.30.1 launcher pro 2.8.1.155
and coding is working let's say disable gong for seat belts, etc.
but for disabling auto start/stop function in CAS unit the car is still acting like before.
from cheatcodes I can see parameter TC_MSA_DEFAULT_OFF set as AKTIV
but in my unit I don't have, or I dont see it...
There is present just something like TC_RESERVED_BYTE3_BIT4
should I firstly update firmware in CAS unit or even whole car to newer I-step? Which one is recommended? Or what should be wrong?
Thanks for any suggestions...