Jbe module flashing failed

[Charger1284]

Hi,

I recently tried to Reprogram My e91 2006 320i with Ista/P.

It crashed out when Programming the JBE.

This caused a failed measures and reported: CoAPI.2000 - (CoAPI) - Ediabas or ECU description file error

After. That the car start, thanks God

But no cluster, abs ligth, wipers, no power locks, dsc ligth ok no tire presure aswell

Looking at how the modules works that is expected

Istad or istap doesn't help, it request a code VO I think and cant identifi VIN 

Surfing de web it is supposed to reflash the modules using winkfp I am searching at this moment newest datens and Also playing with winkfp but I am a little bit Lost, do I need anything else? And I am not sure if winkfp is working properlly since it doesn't show any conection confirmation

[Charger1284]

Hi,

I recently tried to Reprogram My e91 2006 320i with Ista/P.

It crashed out when Programming the JBE.

This caused a failed measures and reported: CoAPI.2000 - (CoAPI) - Ediabas or ECU description file error

After. That the car start, thanks God

But no cluster, abs ligth, wipers, no power locks, dsc ligth ok no tire presure aswell

Looking at how the modules works that is expected

Istad or istap doesn't help, it request a code VO I think and cant identifi VIN 

Surfing de web it is supposed to reflash the modules using winkfp I am searching at this moment newest datens and Also playing with winkfp but I am a little bit Lost, do I need anything else? And I am not sure if winkfp is working properlly since it doesn't show any conection confirmation

Well I tried with winkpf and nothing the error on istap made reference to  zusb 9134485 as new a 693307 not sure  I tried with the first one the process bar advanced til 100% (looks like it is working) and returned several errors, by the way I am using datens V70
 for E89.

also what is need to exit the module from bootloader mode is there anything that I can try ?

by the way I am using k+dcan cable

[Charger1284]

Another question Can You use a enet cable on an e series car?

[wjgud123]

Nope, you cannot use ENET on E series.

First mistake which you do was using kdcan with IstaP....
spdaten v70 are enough to flash that, just use ecu update instead of choose zusb manually

[Charger1284]

Nope, you cannot use ENET on E series.

First mistake which you do was using kdcan with IstaP....
spdaten v70 are enough to flash that, just use ecu update instead of choose zusb manually

ok Perfect I will give it a try, thank you for the help

[Charger1284]

Nope, you cannot use ENET on E series.

First mistake which you do was using kdcan with IstaP....
spdaten v70 are enough to flash that, just use ecu update instead of choose zusb manually

Thank You very much it worked at the first try, just I have a check engine ligth that I dont had before but I will take a look  tomorrow Is there  any other step to complete before ?

Now I feel like a hacker