04-06-2023, 10:07 AM
Hi all
I’ve done some FDL coding to get my car operating how I like it successfully using Esys / launcher pro etc monkey fashion. Because I had become comfortable using Esys and because to enable full screen CarPlay I required an I-step version above hu-nbt evo K I decided to have a go at flashing. Again following useful guides everything went as described, all progress bars filled to 100% and unit reset when completed. Everything works except nav that is stuck on “loading”. This means I can’t check the hu-nbt eve version.
When I run Esys again the I-step shipment and I-step current have not changed. Also when I run flashing again, when TAL calculating, at the point when checking swe software units before clicking start, there is no hu-nbt in the matrix
Cheers
I’ve done some FDL coding to get my car operating how I like it successfully using Esys / launcher pro etc monkey fashion. Because I had become comfortable using Esys and because to enable full screen CarPlay I required an I-step version above hu-nbt evo K I decided to have a go at flashing. Again following useful guides everything went as described, all progress bars filled to 100% and unit reset when completed. Everything works except nav that is stuck on “loading”. This means I can’t check the hu-nbt eve version.
When I run Esys again the I-step shipment and I-step current have not changed. Also when I run flashing again, when TAL calculating, at the point when checking swe software units before clicking start, there is no hu-nbt in the matrix
Cheers