05-03-2025, 08:17 PM
Just looked at it again in the wiring diagram , 99% is the wrong controller for your car , there are 2 versions of this controller and I think this aftermarket controller is the newer version which doesn't work in your car .
as per the wiring diagram , v2 controller although it has the 10pin connector , but it uses only 4 pins ( + / - and can low - can high ).
as mentioned in post #2 , you need an original controller according to your VIN. Actually those aftermarket ones are not cheaper as a good condition oem used controllers, so I would go for a used oem controller than aftermarket new one.
as per the wiring diagram , v2 controller although it has the 10pin connector , but it uses only 4 pins ( + / - and can low - can high ).
as mentioned in post #2 , you need an original controller according to your VIN. Actually those aftermarket ones are not cheaper as a good condition oem used controllers, so I would go for a used oem controller than aftermarket new one.
![[-]](https://www.bimmerscene.com/images/collapse.png)