01-22-2024, 01:01 PM
Hi friend,
I have extracted lot of 1B files using a USB-ETH dongle from DLink like shown.
You only have to connect it to your USB-MapUpdate port (the one in the globebox) and connect through SSH using root:
Connect the dongle to your laptop
Configure your ethernet adaptor with:
Connect using Putty or similar using SSH protocol
Finally, copy this file to local:
/HBpersistence/normal/generalPersistencyData_DiagnosticSWTController
Your 1B file is inside, using a Hex Editor:
Regards.
I have extracted lot of 1B files using a USB-ETH dongle from DLink like shown.
You only have to connect it to your USB-MapUpdate port (the one in the globebox) and connect through SSH using root:
Connect the dongle to your laptop
Configure your ethernet adaptor with:
- IP: 160.48.199.98
- Subnet Mask: 255.255.255.128
- Gateway: left empty
Connect using Putty or similar using SSH protocol
- IP: 160.48.199.99
- Port: 21
- anonymous / no password
- root / cic0803
- root / Hm83stN)
Finally, copy this file to local:
/HBpersistence/normal/generalPersistencyData_DiagnosticSWTController
Your 1B file is inside, using a Hex Editor:
- Find these 4 bytes: 0x01,0x01,0x00,0x1B
- Extract the next 319 possitions.
Regards.