Side/Daytime Lights error.

[MJT95]

• Had my 1 Series F21 2016 for 6 months now and it came with custom headlights which are great apart from one issue that I've put up with, it keeps flagging an error on Idrive that there’s a fault with the “Side/daytime Lights” & “Headlight Aim Control”. Just to be clear, my lights are absolutely fine so I don’t understand how i’m getting this error. 

• On Auto it seems to be the worst so i tend to flick between side and main lights otherwise the chime of death will destroy my sanity. I’ve since spoke to place who put these LED’s in and they gave me the message below:

• “I've just had a look the job card, long story short we had a new set of original F22 headlights supplied to us that we did the conversion to and then fitted to the car as the original headlights were in a bit of mess and not usable (F20 internals hacked into a F22 casing)Both ourselves and another coder had a look but couldn't get anywhere as it's something that was relatively new at the time.”

• LWR system faulty - 8041B6

• Daytime driving lights: Open circuit 805CBC

• Parking light: Function defective: 805CE7

• Side Lights: Function defective: 805CEB

• Welcome lights: Function defective: 805CEE

• Daytime driving lights: Function defective: 805CB2

• Daytime driving lights: Open circuit: 805Е3С

• Parking light: Function defective: 805E67

• Side lights: Function Defective: 805E6B

• Welcome lights: Function defective: 805E6E

• Daytime driving lights: Function defective: 80532LIN:

•  General fault signal timeout: DAOCOO

• Led output 2: strand break: 4401FC

• ===

• I have since bought Bimmercode and coded out the headlight aim control as they are on LED’s(not surer why this wasnt done) and I’ve had some errors go but i’m still getting the side/daytime lights error in iDrive.

• Please, for the love of god..can someone tell me how I can code out my car checking the lights so this error goes away?I was suggested the below but it was already set to this.

• FEM

• 3061

• TFL_L and TFL_RKALT (Set to nicht_aktiv)WARM (Set to nicht aktiv)LED (Set to aktiv)

• Really appreciate your feedback!